Double Column Drawing Press -Hydr.

HYDRAP HPDZB 400 (UVV)

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Hodpfjicbbzex Ag Isfg Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm Hsdpofxyh Ajfx Ag Isfg work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, Year of construction: 2018, functionality: fully functional, pressing force: 1,000 t, stroke length: 800 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 78,000 kg, pressing speed: 10 mm/s, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t Hfsdpfxsyilh Is Ag Isg - in very good condition, used for stamping first series parts from progressive tools

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m Hjdpfx Ajym D E Ajg Iofg

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Hfsdpevmfznsfx Ag Ijg Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL Hodjxwdrvjpfx Ag Iefg as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Hfjdsyxhq Ispfx Ag Ieg Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Hsdpoyxhp Dofx Ag Iefg Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 350 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-guide H-frame structure, high rigidity is ensured during pressing operations, and parallelism and perpendicularity tolerances are consistently maintained even with large bed dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and 350-ton blank holder capacity, is specifically designed for deep drawing processes requiring controlled material flow—ideal for applications in automotive, white goods, defense, and heavy industries. The welded steel construction, stress-relieved by vibration, guarantees long-term, reliable operation. ⚙️ Standard Equipment Hjdpfxjx N Uilo Ag Isfg • Welded steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder (pot) stroke control • Adjustable ram and blank holder (pot) tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Welded steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1000 tons Capacity (Blank Holder): 350 tons Moving/Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length. Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance. ⚙️ Standard Equipment - Welded steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure Hfsdpfxsx N Uhzo Ag Ieg - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications — CHSP 600/200 - Type: Welded steel, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR grade - Slide Bearings: Bronze Zr14 - Capacity (Ram): 600 tons - Capacity (Cushion): 200 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.