Machining center

HURCO VM 10 i

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Travel Z : 508 mm Chodjlf E Aispfx Ab Tof Rapid traverse X/Y/Z: 28 m/min Table : 762 x 406 mm Table load : 1,500 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Chsderu A Atopfx Ab Tof Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2200 mm Measurements depth 2100 mm Measurements height 2600 mm Machine weight 3400 kg Cjdjxu Rxwjpfx Ab Tjhf Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 660 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 406 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 508 mm Z-Axis Rapid Traverse 36 m/min Table Tslots size 14 mm Number of tslots 3 Table load 500 kg Tools Number of index 20 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VM10i was manufactured in 2016. It features a robust table size of 760 × 406 mm, capable of handling a maximum load of 500 kg. The spindle can reach speeds up to 10,000 rpm, supported by a 7.5 kW motor. It includes an automatic tool changer with a capacity of 20 tools. Ideal for precision machining with rapid traverse rates of 36 m/min. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Codpfx Abewd Nwyo Tehf Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface Cjdpfxowfr R Eo Ab Tehf

Condition: ready for operation (used), Year of construction: 2018, 3-axis machining center Brand: HAAS Type: VF3 Year: 2018 CN: HAAS Equipped with: 30+1 position tool changer Chip evacuation screw 20 bar center coolant 10,000 rpm spindle Specifications: Table surface 1219 x 457 mm X-axis travel 1016 mm Csdpfevlk R Esx Ab Tshf Y-axis travel 508 mm Z-axis travel 635 mm Max. load. on table 1588 kg Spindle speed 1 - 10,000 rpm Spindle power 22.4 KW Spindle taper ISO 40 Rapid feed 25 m/min Machine dimensions approx. 2997 x 2794 x H 3048 mm Weight approx. 5600 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Codpfsrdg H Hjx Ab Tjhf Type: ST 25 Year 2017 Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 PLUS HIGH SPEED SPINDLE COOLANT SYSTEM Cjdpfxsxfazpe Ab Tshf SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand MAZATROL Model Matrix Main Drive Spindle speed range 12000 Spindle motor power 22 kw Number of axis 5 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm Table Outer length 500 mm Outer width 400 mm Tools Slots in storage 40 Additional Equipment Swarf Conveyor Control Unit Brand MAZATROL Model Matrix Main Drive Spindle speed range 12000 Spindle motor power 22 kw Number of axis 5 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm Table Outer length 500 mm Codpjwbw A Sefx Ab Tehf Outer width 400 mm Tools Slots in storage 40 Additional Equipment Swarf Conveyor This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Cjdpfx Abju Atmue Tehf Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location