Vertical lathe
HNK VTC-16/20R

Year of construction

2025

Condition

New

Location

Bad Oeynhausen Germany

Show map

Machine data

Machine type:: Vertical lathe

Manufacturer:: HNK

Model:: VTC-16/20R

Year of construction:: 2025

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Weserstr. 228, 32547 Bad Oeynhausen, Deutschland

Call

Technical details

Turning height:: 1,600 mm

Turning diameter:: 2,000 mm

Details about the offer

Listing ID:: A20343870

Update:: 21.10.2025

Description

CNC Vertical Turning Center
Model: VTC-16/20R with Fanuc 31i-B

Table Diameter: Ø1,600 mm
Max. Swing Diameter: Ø2,000 mm
Max. Turning Height: 1,600 mm
Table Speed: Max. 250 rpm
Table Load Capacity: 8,000 kg
Table Indexing Speed: 720°/min
Table Indexing Accuracy: 0.001°
X-Axis (Ram horizontal): -100 mm to 1,170 mm
Z-Axis (Ram vertical): 900 mm
Drive Spindle Speed: Max. 2,000 rpm
Ram Size: 240 mm x 240 mm
Milling Spindle Taper: ISO 50
Tool Shank Size: 40 mm x 40 mm
Crossrail (vertical travel): 250 mm x 3 stages (hydraulic)
Table Drive Motor: AC 37/45 kW (continuous/30 min. duty)
Milling Spindle Drive Power ISO 50: 15/18.5 kW (continuous/30 min. duty)
Control System: Fanuc 31i-B
Display Unit: 15-inch TFT-LCD
Memory Capacity: 1 MB
Automatic Tool Changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools)
Standard Tool Holders: New 240 TCR-01 (2 pcs)
Splash Guard: Table version (R-Type standard design)
External Coolant System: 3 bar (80 l/min)
Chip Conveyor: Hinged belt type
Table Bearing Cooling Device
4-Jaw Independent Manual Chuck
Foundation Anchor Bolts / Base Plates
Maintenance Tools and Toolbox
Hydraulic Power Unit
Work Area Lighting
Signal Lamp: 3 colors (green, red, yellow)
Operating Manuals (English): 1 CD with Fanuc manuals and 3 books with mechanical/electrical manuals
Power Supply: 220 V, 60 Hz, 3-phase
Machine Color: Manufacturer standard

OPTIONAL ACCESSORIES (#1)
Turning Tool Holder: Type 240TCR, 4x included
Rigid Tapping: 1x included

OPTIONAL ACCESSORIES (#2)
Automatic power-off for N.C. - on request
Turning tool holder type 240TCR - on request
Through-spindle coolant supply: 30 bar (pump pressure) - on request
Transformer 415 V, 50 Hz, 3-phase - on request
Linear scales X-, Z-axis (Fagor, Spain) - on request
Workpiece measuring device - on request
Tool measurement TS27R, Renishaw - on request

Other information:
INSTALLATION, COMMISSIONING, TEST OPERATION, AND TRAINING - not included in the price
INSURANCE AND FREIGHT - not included in the price

Image shows machine with pallet changer.
The offered machine DOES NOT INCLUDE A PALLET CHANGER!
Dwedpfx Aboxp Nb Te Tsf

Errors in technical data excepted. The scope of accessories is as described in the text of this article only. There is no entitlement to any other accessories, such as those shown for illustration purposes.

The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

The listing was translated automatically. Translation errors are possible.

Documents

20343870-01.pdf

Seller

Registered since: 2020

11 listings online

Call

Send inquiry

Telephone & Fax

+49 172 2... show

These listings may also fit your interest.

Listing

CNC Turning- and Milling Center Mazak Integrex e-500H II (1500)

Germany

18,384 km

CNC Turning- and Milling Center
MazakIntegrex e-500H II (1500)

Call

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Dodpfxexf Iklo Ab Towf

See details

Listing

Gear Hobbing Machine - Vertical EMAG WF180

Germany

15,455 km

Gear Hobbing Machine - Vertical
EMAGWF180

Call

Listing

CNC Lathe with c-axis GEMINIS - GHT4-G4 GEMINIS GHT4-G4

Babberich

18,541 km

CNC Lathe with c-axis GEMINIS - GHT4-G4
GEMINISGHT4-G4

Call

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial Driven tailstock Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Pinole taper: 5Mk Dwedpfjwzh Eqex Ab Tjf Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

See details

Listing

Planer-Type Milling M/C - Double Column WALDRICH-COBURG POWERTEC 4000 AP

Germany

18,384 km

Planer-Type Milling M/C - Double Column
WALDRICH-COBURGPOWERTEC 4000 AP

Call

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm Dwsdjvwgm Hspfx Ab Tsf spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

See details

Listing

CNC travelling column boring and milling machine, travelling column milling machine with HEIDENHAIN ANAYAK HVM-3800-P

Hessisch Lichtenau

18,422 km

CNC travelling column boring and milling machine, travelling column milling machine with HEIDENHAIN
ANAYAKHVM-3800-P

Call

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Dwsdpsxcgtgofx Ab Tef Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

See details

Listing

Gear hobbing machine Gleason-Pfauter PE300

Barßel

18,364 km

Gear hobbing machine
Gleason-PfauterPE300

€40,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Djdew Dcx Repfx Ab Towf Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

See details

Listing

Cylindrical Grinding Machine - Universal SCHAUDT E 450/1000

Germany

15,455 km

Cylindrical Grinding Machine - Universal
SCHAUDTE 450/1000

Call

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment Dwodpfx Ajwy Ri Nob Tef with fixed and swivelling headstock with coolant tank *

See details

Listing

CNC turning and milling center DOOSAN DAEWOO PUMA V-1200M

Calerno

18,696 km

CNC turning and milling center
DOOSAN DAEWOOPUMA V-1200M

Call

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW Djdpfxewt S Rhs Ab Tewf RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Maximum tool weight in magazine: 600 kg Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.

See details

Listing

Machining Center - Vertical DOOSAN DNM 400

Germany

18,384 km

Machining Center - Vertical
DOOSANDNM 400

Call

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Dedpfx Ajwmxflsb Tjwf Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

See details

Listing