HYDRAULIC PORTAL STRAIGHTENING

Hidroliksan HSPS100 bis HSPS400

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Chjdpjuy Ifgofx Ab Tof

Condition: good (used), centerless grinding machine Csdpfotrguvjx Ab Tohf

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: NEBR-4397, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical details Pressure 15 t Technology stroke 160 mm Machine weight approx. 330 kg oil tank 10 l Csdpfx Abjfhcc Io Tehf robust machine body with solid welded construction, manufactured according to DIN 8651 ##### Additional information low-maintenance and reliable due to robust technology cylinder with induction hardening and chrome plating steel quality: engineering steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 T rotating mandrel attachment, mechanical, with locking, toothed shaft and brake and 220 mm travel hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring back wall projection to the center of the tool holder 280 mm mounting table swivels 180 degrees to the right with 60 mm bore in the center, M 12 T-slots Clearance height between swivel table and slide/turning mandrel guide 450 mm Passage height up to additional table, insertable, 650 and 800 mm Additional table with center hole, 60 mm, insertable, T-slots M12, size 270x200 mm Height of the base with two inserts for additional table 750 mm on the cylinder a pressure plate, hardened, diameter 10 mm bigger than cylinder in the cylinder head tool holder M 30 Pump lever moves from top to bottom Oil tank for 10 L hydraulic oil AW 46 Painting of the machine body: Blue, RAL 5012, pressure paint Painting of the attachments: Anthracite, RAL 7021 hydraulic single-column combination press as a special machine 15 tons, manual (C-press, hydraulic press, hydraulic press) ##### Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), functionality: fully functional, machine/vehicle number: HV-300NC, total height: 1,840 mm, table height: 950 mm, total width: 3,200 mm, total length: 2,500 mm, pressing force: 300 t, table length: 750 mm, operating speed: 10 mm/s, reverse speed: 15 mm/s, stroke length: 450 mm, pressing speed: 2 mm/s, Equipment: documentation/manual, TECHNICAL DATA: Pressing force: 300 t Motor power: 7.5 kW Throat: 405 mm Working speed: 2 mm/s Approach speed: 9.9 mm/s Return speed: 14.7 mm/s Maximum pressure: 320 bar Piston stroke: 450 mm Support table: 2,500 x 750 mm Guide diameter: 60 mm Main table: 750 x 750 mm Max. daylight between tables: 900 mm Working height: 950 mm Support blocks: 150 x 150 x 750 mm Total length: 3,200 mm Chodpfx Abewk Hkqe Tsf Total width: 2,500 mm Total height: 1,800 mm Weight: 13,300 kg DESCRIPTION: Our HV/NC series horizontal hydraulic straightening presses are available with three different pressing forces, ranging from 150 to 300 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars, and beams. Thanks to the horizontal design of the machine, large beams and profiles can be processed with ease. The latest generation HV/NC series horizontal hydraulic press has become a versatile machine capable of accommodating a wide variety of tooling options. STRUCTURE AND TABLES The HV/NC series horizontal hydraulic straightening presses consist of a C-frame, fully electro-welded structure made exclusively from S355JR steel. After welding, the structure is stabilized and machined to ensure perfect parallelism and precision. The frame is calculated and built using finite element analysis software. All of this ensures our consistently high standards in robustness, precision, and quality. The presses are equipped with a main sliding table and a rear support table made of high-strength steel, both fitted with DIN 650 T-slots. Support blocks made from C45E steel are supplied as standard. The main table guarantees perfect parallelism through four cylindrical guides featuring maintenance-free, frictionless bimetal bushings. Each side is equipped as standard with two height-adjustable roller supports. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder made from seamless, cold-drawn tubing, with a chrome-plated piston and maintenance-free, wear-resistant guides. The motorized hydraulic power unit features two speeds and automatic disengagement of high speed. Includes cylinder decompression valve. ELECTRICAL INSTALLATION AND SAFETY The machine is equipped with a SIEMENS safety PLC, SIMATIC S7 1200 type, and a 4-inch MTP-400 touchscreen located above the electric foot pedal. This allows programming of operating modes in semi-automatic and automatic, power setting, stroke, and dwell time of the upper cylinder. The system has a storage capacity for 99 recipes, with all parameters configurable for each recipe. The electric control panel is equipped with a selector switch for manual or automatic operation, as well as a key switch for maintenance operations. Both electrical and hydraulic circuits feature redundant and self-monitoring controls. An additional safety block and self-monitoring devices for actuation and safety are integrated.

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch Codpfx Ajg Akgtsb Tshf infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1986, condition: like new (used), More information on request Cedpfx Abjhmfnhe Tshf

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width Chjdpjwp Nv Hefx Ab Tsf 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Csdpfx Aofxygwjb Tshf After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: Chodpfx Aevtpgheb Tef - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: good (used), All information without guarantee. Chedpfsfd R Ahsx Ab Tef A demonstration is at any time possible in our showroom.