Bottle level control

Heuft

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Chsdpfxol Hxnie Ab Tof

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster Cedpfxsxvda De Ab Tjhf - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Cedpjwzvl Sofx Ab Tshf

Condition: used, Year of construction: 2014, Overview The OPP labeller Krones Contiroll HS was manufactured by Krones in 2014. It was used in a dairy plant in the Philippines. It was used for cans, filled with milk. The cans had the dimension 209mm x 208mm. As the machine became redundant, it is for sale now. The machine is already disassembled, but can be inspected. Full technical information is available. Tech Specs: Capacity: 36,000 uph Control: Siemens S7 Number of aggregates: one Container dimension: 209mm x 208mm Dimensions: Height: 2450mm Length: 2800mm Width: 3230mm Chjdpfx Abol Hx Dqj Tsf

Condition: used, Year of construction: 2004, Used fully overhauled Depalletizer 40,000 bph We have a used fully overhauled depalletizer available for purchase manufactured by Krones. This depalletizer was fully overhauled by Siemens PLC in 2020, including the installation of new PLCs and sensors, ensuring that the machine is up-to-date and efficient. The depalletizer is capable of operating at high speeds of up to 40,000 bottles per hour, making it ideal for high-volume production lines. Features and Specifications In addition, this Used Full Overhauled Depalletizer is equipped with a bottle mass table, sheet removing arm, and magazine, as well as a pallet magazine. The machine operates automatically, with a new PLC in 2020 Siemens ensuring that your production line runs smoothly and efficiently. Additional Details With its high-speed capability and reliable operation, this depalletizer is an excellent investment for any production line in need of efficient and streamlined depalletizing. The machine is currently in a ready-for-operation state with Siemens PLC and comes equipped with safety features and manuals, making it easy to operate and maintain. Invest in Your Production Line Today Chedpfxovguhdo Ab Tjf If you are looking for reliable and efficient depalletizing equipment for your production line, this used full overhauled depalletizer from Krones is an excellent choice. Contact us for more information on pricing and availability. This Full Overhauled Depalletizer was in operation in a company that produced beer in glass bottles. It is complete with all safety protections and can be immediately collected by the buyer. We can also provide you with assembly, packing, and transport services if needed through our agencies. The Used Full Overhauled Depalletizer was in production and efficient and was replaced only thanks to incentives that allowed the purchase of a newer one with the latest generation techniques. It is dismantled in stock and with all documents available. We are at your full deposal for this and other products.

Condition: used, Year of construction: 2008, Overview  The following 2 component mixer was built in 2008 by the German manufacturer Famix. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h 2-component mixer  Dimensions (LxWxH): 3,200mm x 1700mm x 2700mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 regulation CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz, 80A  SIEMENS S7-300 Chedpfx Absxb Akrj Tof

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Chsdpfx Aswr T Eweb Tjf Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2019, Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data Capacity: up to 72,000 bph Formats: 75 cl Inspection features: Fill level and cap control Scope of Delivery  Fill level inspection system | HEUFT | PRIME | 2019 Reject system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters) Codpfx Abjwfq Nte Tehf

Condition: used, Year of construction: 1993, Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling Capacity: 150 Pallet/h Csdsw Uc A Aspfx Ab Tehf Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine:Athena Roboband 2VH; Year of construction: 2004Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h