Decoilers for Coils

HESSE by COILTECH CMC S 1250 400 M D1300

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor Kjdpsg U Utvjfx Ah Nell (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m Kodpfx Ahst Hmk Te Noll

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. Kodpfx Aor H Dwieh Noll pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm Kjdpjwc U Izefx Ah Noll speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted Ksdocdrmiopfx Ah Nsll

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. coil diameter: max. 650 kg. Kodpfodx Rzmsx Ah Nsll strip metal width: max. 100 mm

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm Klsdjv Svaxepfx Ah Nel material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Reel - straightening - combination strip width: 360 mm Kledstq Sgnepfx Ah Nel Strip thickness: 0.6 - 3.5 mm Cross-section: 900 m² at 400 N/mm² - Straightening rollers: 7 - Single roller infeed - Infinitely variable speed control via frequency converter - 2 pneum. draw rollers Reel: - Coil weight: 2000 kg - manual spreading - pneum. pressure arm - common base frame

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Number of straightening rollers 9 Max. belt width 400 mm Kedpfx Aev Hrltjh Nsll GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Further data and pictures on request

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW Klsdpfx Ahsvzxqfo Nel weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual