Dedusting machine Heesemann EA4

Heesemann EA4

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Gjdpfx Ahoxiy Htovstw Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Gtsdpfxjuxnyus Ahvow Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Gtedpfx Ahov D H Siovjw Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump Gsdpfx Asyi Eaaohvotw incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: used, Year of construction: 1990, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, grinding belt length: 7,800 mm, total height: 1,700 mm, total length: 4,100 mm, total width: 1,900 mm, overall weight: 800 kg, extraction connection diameter: 180 mm, space requirement height: 1,700 mm, space requirement length: 4,100 mm, space requirement width: 1,900 mm, table length: 2,800 mm, table width: 950 mm, transport length: 4,100 mm, transport width: 1,900 mm, transport height: 1,700 mm, No. 3251 Gedpfoyifilsx Ahvjtw Long belt sander Johannsen T 85 / PNEUMA Used, year of construction 1990 Table dimensions 2800 x 950 mm LW Sanding belt dimensions 7800 x 150 mm LW Passage under belt 340 mm The sanding table rests on ball-bearing prismatic rollers The table height is adjusted by motor Pneumatically controlled pressure shoe unit, the pressure can be adjusted depending on the material 2 sanding pads Dust extraction system, blower motor 1.1 kW Suction nozzle diameter 180 mm Belt blow-out nozzle for cleaning the sanding belt Motor power 5.5 kW Left crank 550 x 310 The machine can also be used as a brushing machine if a brushing head with a diameter of up to 290 mm is mounted on the left-hand belt drive side Transport dimensions approx. 4100 x 1900 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), CATALOG NO. 7728 TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg ADVANTAGES – Unpainted Gtjdpfxeya Hmvo Ahvew – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7683 Technical data: - Cutter block width: 510 mm - Number of knives: 4 pcs - Maximum thickness of workpiece on thicknesser: 200 mm - Manual table lift - Maximum thickness of workpiece on side heads (3-sided): 100 mm From above: - Anti-kickback fingers - Feed (infeed) roller, serrated - Pressure bar - Planing (cutter) block - Pressure bar - Outfeed roller, smooth From below: - Adjustable rollers in lower table: 2 pcs - Guide bar From rear: - 2 side spindles + pressure bars - Spindle height: 100 mm - Maximum spindle spacing: 510 mm Gtedpfx Ajyarghjhvew - Spindle diameter: 25 mm - Includes 2 cutter heads - Spindle adjustment: right/left - Motor: 2×2.4 kW - 2 feed speeds - Extraction port diameter: 2×100 mm - Main motor: 7.5 kW - Overall dimensions (L/W/H): 1850×1250×1000 mm - Weight: 1080 kg ADVANTAGES: – Made in Poland – 4-knife cutter block – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)