Edge banding machine

HEBROCK AKV 3003 DK-F

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw Ksdpfx Ahowmc I De Noll top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Year of construction: 1993, condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Ksdpfx Aspcgy Heh Nell

Condition: used, Year of construction: 2018, Available after alignment of the panel: from the operator to the left Max. edge banding thickness: 3 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 40/60 mm Min. workpiece width: 80 mm Min. workpiece length: 190 mm Feed speed: 10 m/min Heating time: 5 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter: 100 mm, height: 48 mm Adjustment of infeed fence: manual Guillotine up to: 3 mm Individual edge feeding: possible Kledpfxjx Rdm As Ah Nel Gluing: glue contact roller PUR gluing: possible Cut-off saw: Yes Combination unit flush/chamfer/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Scraper: Yes, with sensor Aggregate display: on the display Control type: PLC line control Operation: touch screen Motor power: 12 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 1250 kg Extraction diameter: 80/140 mm Including additional change-over glue pot Location:

Condition: ready for operation (used), Year of construction: 2002, This HEBROCK AKV 3003 DK-F was manufactured in 2002. A robust edgebander with a total power of 10.5 kW, operating on 230/400 V and 50 Hz. Ideal for efficient edgebanding operations. Contact us for more information about this machine. Ksdpox E Eayefx Ah Njll Application Types Edge Banding

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws Kjdpfx Ajv H D S Soh Njll top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Kodpfjw Nih Iex Ah Njll Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Klsdpfxjw Sd Uus Ah Nel Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Kljdsvqbh Eopfx Ah Nel

Condition: used, Year of construction: 2022, operating hours: 400 h, total length: 80,000 mm, total height: 20,000 mm, total width: 24,000 mm, Weight: 5.000 kg Price: On request Homag Sawteq B-130 Year: 2022 Serialnumber: Kedpfx Aowu E Eujh Nell Specification: 3200mm cutting width and length 65mm blade projection Program fence speed forward 25m/min Program fence speed backwards 60m/min Clamps 50, 250, 450, 1200, 2000, 2700mm 4 Manual trim stops Saw carriage speed 60m/min Main saw motor 7.5kw Scoring saw unit Intelliguide optical LED assistance 1 air table 2100 x 650mm with roller element 2 air tables 1800 x 650mm with roller elements 21.5 inch touch screen display CAD Plan 4 optimising software  - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 400 - Main motor power [kW]: 7.5 - Control: CADmatic 5 - Software: CADPlan 4  - Saw blade bore diameter [mm]: 60 - Max. saw blade diameter [mm]: 310 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Options: Voorritser, Optimalisatieprogramma - Feed speed: - └ Max. feed speed [m/min]: 60 - Scoring unit: - └ Scorer bore diameter [mm]: 45 - └ Scorer blade diameter [mm]: 150 - Transport dimensions: 80000mm x 24000mm x 20000mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Kjdpfx Aeihahmsh Nsll Location: Ex stock 54634 Bitburg - free on truck - - immediately available -