Edgebander

HEBROCK AKV 3003 DK-F

Condition: excellent (used), Hebrock 3003 Edge Bander Nedpfxswmc I Ds Ad Njcl well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW Njdpfxjxl Ha So Ad Njcl With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2018, Available after alignment of the panel: from the operator to the left Max. edge banding thickness: 3 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 40/60 mm Min. workpiece width: 80 mm Min. workpiece length: 190 mm Feed speed: 10 m/min Heating time: 5 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter: 100 mm, height: 48 mm Adjustment of infeed fence: manual Guillotine up to: 3 mm Individual edge feeding: possible Gluing: glue contact roller PUR gluing: possible Cut-off saw: Yes Combination unit flush/chamfer/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Scraper: Yes, with sensor Aggregate display: on the display Control type: PLC line control Operation: touch screen Nedsx Rdm Aspfx Ad Nscl Motor power: 12 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 1250 kg Extraction diameter: 80/140 mm Including additional change-over glue pot Location:

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Nedpfxew Nih Is Ad Nscl Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper Nodpfxed Inkto Ad Nscl - buffing unit

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Ncjdpfx Ajl H E H Hsd Nel Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Nsdox Eilqopfx Ad Njcl Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Max Panel Length: 55 mm Nedsrl Utbjpfx Ad Nocl

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Nsdpfxjuhm Ade Ad Nocl Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Njdpfsvvkd Tjx Ad Nocl