2014 Homag Kal 210 Ambition 2264

Homag Kal 210 Ambition 2264

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements depth 7845 mm Machine weight 5000 kg Additional Equipment HOMAG gluing and finishing components This HOMAG KAL 210 AMBITION 2264 edgebander was manufactured in 2010. It features a max glued edge thickness of 20 mm, edge gluing height up to 60 mm, and a max feed speed of 25 m/min. Equipped with a granulate glue system, preheating zone, and various processing units including a joint trimming and corner rounding unit. Consider the opportunity to buy this HOMAG KAL 210 AMBITION 2264 edgebander. Contact us for more information about this machine. Application Types Edge Banding Djdpfxox D H R Uo Afnoul

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Djdpfx Afotnggysnsul Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Duedjwd Itmjpfx Afnsl Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Dusdpfsxzfwbjx Afnjl MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper Dedpjwka Nyefx Afnoul - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Dsdjxg Ix Sopfx Afnsul - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm Dujdjrmucxspfx Afnol sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Year of construction: 2002, condition: ready for operation (used), Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. Duodpfxen Tpm Hs Afnel

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Dodpfx Afjvvi I Roneul

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Dodpfx Afsg A Hcueneul