Punching machine
Haulick & Roos RVD 80-800NS

Name: Haulick & Roos RVD 80-800NS
Brand: Haulick & Roos
Availability: InStock

Year of construction

1990

Condition

Used

Location

Korschenbroich Germany

Punching machine Haulick & Roos RVD 80-800NS

Show map

Machine data

Machine type:: Punching machine

Manufacturer:: Haulick & Roos

Model:: RVD 80-800NS

Machine number:: 1203697

Year of construction:: 1990

Condition:: excellent (used)

Price & Location

Location:: Im Hasseldamm 1, 41352 Korschenbroich, Deutschland

Call

Details about the offer

Listing ID:: A16887791

Reference number:: H&R 80

Update:: 19.12.2025

Description

Bros. punching press
Make: Haulick & Roos
Type: RVD 8/800 NS
Press with adjacent console:
Haulick & Ross RVD 80-800NS
Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft
No: 1203697
YEAR OF MANUFACTURE: 1990
Press force: 800kN Speed: 30-300/min.
Drive: 26kW Ram stroke: 4-60mm
ram adjustment: 80mm
Table: 800x640mm
Fold-through hole: 780x60-160mm
Table over floor: 1240mm
Frame width: 780mm
Lateral upright width: 350mm
Installation height max. stroke bottom/ram top: 300mm
Space required for press (LxWxH): 3200x1700x3000mm
Control cabinet (LxWxH): 1800x400x 1900mm
Weight: 12.000kg

Reel:
Eigl 2527-90
Kljdpfoudn Utox Ah Nsl
Driven: no
Straightener with strap loop sensor:
Eigl RST W37/300 (2528-90)
Max. width: 300mm
Max. Thickness: 3mm
Number of rolls: 5

Feed rate:
Haulick & Roos RS 260/120°/2727
Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm
Feed speed 40m/min.
Material cross-section up to 800mm?

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2014

44 listings online

Call

Send inquiry

Telephone & Fax

+49 211 4... show

Fax:

These listings may also fit your interest.

Listing

High speed press HAULICK & ROOS RVD 80 - 800 NS

Strassberg

18,652 km

High speed press
HAULICK & ROOSRVD 80 - 800 NS

Call

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Ksdsuqc I Aspfx Ah Njll Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm

See details

Listing

Punching machine Haulick+Roos RSH 500-1250

Neunkirchen am Brand

18,437 km

Punching machine
Haulick+RoosRSH 500-1250

Call

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive Kjdpfx Aoip Uqmjh Nsll - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

See details

Listing

Mudersbach

18,541 km

Ring & profile bending machine
OstasOPK 45 - 3

€6,400

ONO plus VAT

Call

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: Kjdpfx Ahjg Tzbwo Nsll 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

See details

Listing

Automatic bar lathe Citizen Cincom R04 VI

Turkey

17,196 km

Automatic bar lathe
CitizenCincom R04 VI

Call

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Kjdjvtancepfx Ah Noll VAT is not needed if the sales happen outside of Turkey.

See details

Listing

Dortmund

18,513 km

Rotary hearth furnace
VEI

Call

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 Kjdpfx Ahog E S Inj Nell number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

See details

Listing

Częstochowa

17,870 km

Press brake
AMADAITPS III

€5,900

fixed price plus VAT

Call

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Kledpfxjwq Dpqj Ah Nsl Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

See details

Listing

Erowa vice PalletSet W EROWA ER-025895 , ER-054922 , ER-055774

Karlsbad

18,647 km

Erowa vice PalletSet W
EROWAER-025895 , ER-054922 , ER-055774

Call

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W Klsdpsitcq Tefx Ah Nsl ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

See details

Listing

Tapping Machine DUMETA D-BD-M16 / 180-2000

Velen

18,509 km

Tapping Machine
DUMETAD-BD-M16 / 180-2000

Call

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: Kodpfx Ahsfg U Sqo Nsll variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

See details

Listing

Bevel Gear Cutting Machine Klingelnberg SNC30

Germany

18,384 km

Bevel Gear Cutting Machine
KlingelnbergSNC30

Call

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Kjdorgahxspfx Ah Nsll

See details

Listing

Eccentric Press - Single Column WEINGARTEN ARP 250 (UVV)

Eislingen/Fils

18,583 km

Eccentric Press - Single Column
WEINGARTENARP 250 (UVV)

Call

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t Kjdpovuuaiofx Ah Noll dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

See details

Advertise here