Punching machine

Haulick+Roos RSH 500-1250

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity Ledpfsvnriusx Aftead

Condition: used, Year of construction: 2014, Please contact Theo Lelie for more information Lajdextqkwjpfx Afted

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140 mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool holder system (upper tools) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with worldwide applicable standards Electrical equipment, in accordance with worldwide applicable standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power 37 kW Oil tank capacity 250 liters Length 4300 mm Width 1820 mm Ledpfx Ajfifg Hjftoad Height 3230 mm Weight approx. 17250 kg

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m Lsdpfx Ajcxxx Roftead with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. Lodpfx Afet Ucpbotead The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm Ljdpfxeyxpado Aftead control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, Various very heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 Ljdpfjwu Exzjx Aftoad - 2 x 1 meter, €2,300; plasma nitrided €3,300 - 2.4 x 1.2 meters, €2,900; plasma nitrided €3,900

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: Ledpfx Ajy D T S Ujftsad - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop Tools: 2x 10-function multitool 1x 5-function multitool 1x 5-function EeasyType multitool 5x thread forming tools 1x Multishear 1x calibration tool 1x ball deburrer 2x gills M3–M8 threading dies Centering studs (top and bottom) Countersinking tools for 1.5 and 2 mm Various countersink and form countersink tools

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation Lsdpfxewugczs Aftjad 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Lasdpfx Afed Nw Ttsted Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv