Double cross-cut saw

Hüllhorst DH

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm Nodpjxrzfvsfx Afaowf e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors Nsdpfjv Si Szex Afajwf 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Njdpfx Afeglfv Deajwf Variable feed speed rate mt/min 0-30

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Nododx Elmopfx Afajwf Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Nsdpfjv Ummbjx Afaowf Frame roller conveyor 4-strand puller Viewing by appointment.

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Nwsded Raqkspfx Afaof Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Nwodotykw Sepfx Afasf Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor Nwjdjxq Rgyopfx Afaof - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Nedpfx Ajxgdrbefaswf

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. The KINGWAY MX-MRW14 model is a modern, compact track loader with skid-steer steering, engineered for efficient operation in challenging terrain and confined spaces. Thanks to its compact design and high maneuverability, the MX-MRW14 is ideally suited for construction, landscaping, and municipal applications. The KINGWAY MX-MRW14 is a reliable solution for professional users seeking a compact yet powerful machine that combines functionality, durability, and low operating costs. Mini Skid-Steer Track Loader KINGWAY MX-MRW14 Technical specifications: Model: MX-MRW14 Operating weight: 620 kg Bucket capacity: 0.1 m³ Travel speed: 0–4 km/h Max. lifting force: 180 kg Max. working height: 2,500 mm Max. pin height: 1,967 mm Max. dump height: 1,575 mm Reach at max. dump height: 480 mm Wheelbase: 905 mm Ground clearance: 130 mm Bucket dump angle: 70° Dimensions: Nwodsyk Ekhspfx Afaef Bucket width: 1,120 mm Overall length: 2,090 mm Overall width: 1,020 mm Overall height: 1,180 mm Turning radius: 1,140 mm Engine: Manufacturer: RATO Model: R420D Power: 8.6 kW Max. engine speed: 3,600 rpm Cooling: Air cooled Engine oil capacity: 1.1 l Fuel: Petrol Tyres: Tyre size: 18×8.50–8 NHS Tanks: Fuel tank: 5 l Hydraulic oil tank: 30 l Price: Net: €4,200 Gross: €4,998