Laser cutting machine

GWEIKE LF 1313

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Iasdpfx Aaexcuice Eew Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Iodoyrdgqspfx Aa Ejaw Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase. Iaodpjxx R A Dofx Aa Eow

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Iasdpjyrdfajfx Aa Ejw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Iajdpfxszix Ups Aa Eew Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar Iasdpfxeywwrfo Aa Esw • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display Isdpfx Aaoxt Rdwe Eeaw • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 180 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Technical condition: very good Front tires, type: solid tires Front tires, size: 16-5-11 1-4 Front tires, condition: 80 - 100% Iodezdwbkspfx Aa Eoaw Rear tires, type: solid tires Rear tires, size: 16-5-11 1-4 Rear tires, condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery year of manufacture: 2016 Battery condition: 60 - 80%

Condition: like new (used), Rofin DC 025 laser source, in working condition. Iaedpfxozkuzhs Aa Eew

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: mechanical, controller manufacturer: FSCUT 2000E, laser type: fiber laser, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 6 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 1,000 kg, power: 3 kW (4.08 HP), overall weight: 4,550 kg, total length: 4,261 mm, total width: 2,431 mm, total height: 1,789 mm, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, Fully enclosed single-table laser cutting machine. The M3 series is a fully enclosed single-table laser cutting machine developed and produced by RECAM XAPA - BAISON, suitable for cutting metal sheets such as carbon steel, stainless steel, or aluminum. It meets various cutting needs for medium and thin sheet metal. Iaedpow D Uvnsfx Aa Eow