CNC lathe

Gurutzpe A1000 x 3000

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Bjdpfxoxtiune Amredh Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Video of the machine in operation available! Bedpfjv Hx R Nox Amredh

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Bdjdpfxsyuchro Amrsh Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 110 mm, turning diameter: 1,300 mm, center height in crank: 710 mm, center width: 890 mm, turning length: 6,000 mm, total length: 11,920 mm, total width: 3,600 mm, total height: 2,760 mm, spindle speed (max.): 1,000 rpm, CNC LATHE GURUTZPE GL 13 (BRAND NEW) TECHNICAL SPECIFICATIONS CNC lathe GURUTZPE Model GL13.10.6 CNC FAGOR 8065 Distance between centers: 710 mm Bdsdpfxjzqfi Nj Amreh Maximum turning diameter over carriage: 1000 mm Maximum turning diameter over bed: 1300 mm Distance between centers: 6000 mm Maximum load between centers without steady rest: 10 tons Automatic turret, 4 positions – Baruffaldi 265 Manual chuck: 800 mm X-axis travel: 675 mm Z-axis travel: 6000 mm Bar capacity: 110 mm Spindle speed: 0-250 / 0-1000 rpm Main motor power: 28 / 34 Kw Rapid traverse: X-Y-Z: 8000 mm/min Footprint dimensions: 11920 x 3600 x 2760 mm Approximate total weight: 17,000 kgs PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST.

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm max. module 25 min. module 2 workpiece weight max. 6000 kg max. number of teeth 432 min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm total power requirement 75 kW Bedpfjyq Szaox Amrjdh weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced Bdsdpfx Amjzcv Egjroh - Scraper replaced - Reference points adjusted - Test run performed

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Bodpfx Amsztz Hcsrsdh

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine Bjdpfx Amjy S Akpersdh – Equipment visible in the photos

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Other quantities also possible! Bdsdpfowtrztjx Amreh A total of approx. 600x SK 50 holder available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 1,600 mm, turning diameter: 520 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, Pinacho CNC lathe, Taurus-260 x 1500mm, equipped with a Fagor 8055 CNC control. Swing over bed: 520mm, swing over cross slide: 310mm, spindle bore: 80mm, variable speeds from 0-2500 rpm. The lathe features a universal 3-jaw chuck with a diameter of 250mm and a manual quick-change tool turret, and is equipped with a fixed steady rest. All bearings of the main spindle and tensioners have been replaced with new ones. The lathe is in very good condition. Bedpfxozmp Etj Amrsdh