Machining center / 5 axes

Grob G 350

Year of construction: 2013, condition: ready for operation (used), Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible. Dkjdpfjvw Apqex Afzju

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Control: Heidenhain TNC 530 Djdjw Eut Aspfx Afzeku X: 600 mm Y: 770 mm Z: 675 mm Spindle speed: 16,000 rpm NC swivel rotary table: 400x400 mm HSK A 63 tool holders Renishaw infrared system

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: U220633501233, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 16,000 rpm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine ___ Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine control SIEMENS SINUMERIK 840D sl Standard interface 1.7 (GROB) Machine protection system CMS 100 (BRANKAMP/MARPOSS) Zyklus 996 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B’-axis, PW) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnostic GSD Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM171 with 171 tools Tool cleaning device Tool coding system BIS-C (BALLUFF) Electromechanical tool breakage detection device Pallet change system for 2 400 x 400 mm pallets Setup station doo, automatic, for automatic load and unload systems Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flushing gun part clamping system in the work area  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1) Part clamping system in the setup station  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1)  KP6: Compressed air, manual pressure regulation, 0.5-5 bar (P1) Infrared touch probe m&h Machine status light Remote machine diagnostics, without access control switch Dkedpfxsw Ev Rve Afzju Warranty for Quality Checked Used Machine, 3 month

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm z-travel: 675 mm Dodeqy Sr Sspfx Afzeku total power requirement: 47 kW weight of the machine ca.: 13 t Tool bore: HSK-A63 numbers of tools in magazin: 40 including additional tool magazine ZM 182 1 spindle , 5 axes *

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: U268893501006, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 90, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highligts: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - 90 tools in system - ready for automation ___ Basic machine G350-1006 access-SERIE Travel path X-axis: 600 mm Travel path Y-axis: 770 mm Travel path Z-axis: 805 mm Power supply 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Work area door, automatic, for manual and automatic loading/unloading Decentralized mist collector unit for the work area Dkodpfew Eiw Njx Afzju Machine protection concept for emulsion machining Work area lighting Machine paintwork according to GROB standard Machine cooling system with air-cooled cooling unit (4.0 kW) Operating/environmental conditions according to GROB standard Electrical equipment according to EU GROB standard Stainless-steel internal work area enclosure Fluid cabinet doors HEIDENHAIN TNC 640 machine control Control interface (HMI) in the German language Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnosis GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Palette 400 x 400 mm, grid holes, without pallet changer hook Premium package -Scraper conveyor, discharge height 1,100 mm -Cutting fluid filter system -Cutting fluid tank -High-pressure cutting fluid system (5-40 bar, IKZ) -Cutting fluid low-pressure system Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Flush gun at the work area Flushing unit (Z-axis) Machine status light, 3-colored Preparations for use of radio and infrared signal receiver (RENISHAW) Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: new, Year of construction: 2025, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch Dkodpfxeqqi Dkj Afzou 12 month warranty

Condition: like new (used), Year of construction: 2023, machine/vehicle number: U2456335210135, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - Highly dynamic rotary table - Latest Machine Generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, manually operated, for manual loading/ unloading Decentralized work area mist collector 800 m³ SIEMENS SINUMERIK 840D sl machine control with GROB⁴Pilot Swivel axis calibration GSC Advanced Time-controlled start of warm-up program - programmable at the HMI Tilting table, highly dynamic rotary table (A axis) Highly dynamic rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnosis GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 105 (45+60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette ø320 mm, T-slots arranged in a star shape Pallet equipped with 4 fluid connections Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Cooling unit for hydraulic proportional valves Additional control panel Dsdpsuqiu Aofx Afzjku Platform at the tool magazine door Machine status lamp in the machine enclosure Preparations for use of radio signal receiver (RENISHAW) Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Dsderuqp Djpfx Afzoku Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Collision monitoring DCM Collision (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month