Plasma Cutting Machine

GEPELEKTRO Phantom CNC

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies Podpemxkdpjfx Ah Hjgg facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system. Psdpfx Astp Dhpeh Hjgg  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 1.4 m³, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004501 The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear and front dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. When ordering a car trailer, please state the GVW of the vehicle with which you are towing the trailer. Available options for additional equipment * Additional drop sides * High bows with 80 cm high tarpaulin * Brackets for fastening the lashing straps * Anti-theft device Podpfxjir H Rwj Ah Hjgg * Spare wheel Technical data of the Garden Trailer 201 KIPP car trailer FAHRWERK - Steering axle from the manufacturers Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE WALLS - all side walls are made of galvanized steel. Total height of the drop sides: 70 cm Delivery costs will be charged additionally.

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical data: Psdpfxjd Af Shj Ah Hsgg -Plate thickness up to 6-40 mm -Pipe Beveling min. Ø 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Podpfsfk Aivjx Ah Hjgg

Condition: used, Year of construction: 2017, table width 3000 mm table length 1500 mm burner heads 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38mm Maximum: 44mm Separating cut: 57mm Piercing: 25mm Output current: 30-125A Pgodjucpnljpfx Ah Hsg Mains connection: 400v-36A Compressed air requirement: 260l/min Air pressure 5.9bar Dimensions: 592 x 274 x 508 mm Weight: 49kg

Condition: good (used), Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine Pjdpfx Asd Izt Sjh Hjgg -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg

Condition: new, empty load weight: 320 kg, maximum load weight: 680 kg, overall weight: 1,000 kg, loading space length: 2,400 mm, loading space width: 1,260 mm, loading space height: 100 mm, tire size: 155r13c, Drop-down trailer from trailer manufacturer VEZEKO model HUSKY Vehicles can be easily loaded with a lowerable car trailer. The platform is raised using the hand hydraulics. The platform is lowered by opening the valve on the hand pump. This allows lawn mowers, machines, motorcycles, pallets, quads and ATVs to be driven up the slight incline. The standard equipment of the Senkomat includes a manual hydraulic system, drawbar box, lashing eyes, support wheel with bracket, sturdy welded hot-dip galvanized frame and a very stable V-drawbar. Pedpfxoglxifj Ah Hjgg The exact equipment and technical details can be found below. We also offer the lowering lift trailer as a tarpaulin trailer or box trailer. Trailer accessories such as motorcycle rocker, motorcycle rail, tarpaulin & high frame, side wall attachment, lattice attachment, motorcycle lashing straps, belts, shock absorbers, TÜV for 100km/h and anti-theft device. ----- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: repair required (used), Year of construction: 2024, Overhauled: 2024 PLC control: Siemens S7 Saw blade 60 - 250 mm Motor power 1.5 KW Saw blade feed 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Working area max.: 60x40 mm (non-ferrous metal) Working range round: 5 - 70 mm (steel) Working range round: 5 - 50 mm (non-ferrous metal) Pgedsuiy I Ajpfx Ah Hsg Feed length 5 - 500 mm 5-9999 (multiple stroke) Feed speed max. 500 mm/sec Weight (saw)approx.: 610 kg Dimensions LxWxH (saw)approx.:2500mm x 1000mm x 2000mm The machine will be overhauled in our company on customer request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - Replacement of the pneumatic feed or replacement of the ball screw spindle - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Optimization of the suction concept - Maintenance of the central and minimum lubrication system - Replacement of general wear parts - Overhaul of the machine body The machine also has: - Minimum lubrication for optimum sawing quality Due to its equipment and design, the machine is suitable for mass cutting of steel in the high-precision tolerance range. Guarantee: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion of the sawing unit to a gearless main drive for sawing non-ferrous metals and plastic materials (speed 1000 - 3000/1min.). - Feed unit 1000mm - Feed unit 2000mm - Screw magazine 4m - Screw magazine 6m - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prismatic jaws (60°) for mass clamping of round materials - Discharge system - Delivery and installation on your premises - Training of your employees

Year of construction: 1990, condition: repair required (used), The machine of this series is used for the automatic waste-free production of rolls, cores and other cylindrical rolled articles. Only strip material is processed. Starting material: strip thickness from 0.7 to 1.5 mm from 3 to 23 mm width / 2 mm to 23 mm width. The machine operates automatically / loading is independent. Required machine area approx. 1500 x 1000 mm Switch cabinet approx. 800 x 350 mm Machine weight approx. 800 kg Switch cabinet approx. 60 kg Pgedpefnqbwjfx Ah Heg Output machine max 300 pieces/min. Automatic material reel included.