Band saw

George CY275A

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Kdsdpfxjudi Uzs Ah Eet Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: like new (used), Log circular saw, for diameter until 1100mm Kodpfx Ahji Ek Hpe Eedt

Condition: new, Saw blade --- 2925 x 27 x 0.9 mm Saw speed --- variable, 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity at 90° --- 270 mm / 260 x 320 mm Cutting capacity at 60° --- 140 mm / 140 x 140 mm Cutting capacity at 45° --- 230 mm / 220 x 220 mm Cutting capacity at -45° --- 200 mm / 220 x 150 mm INCLUDED Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Kdjdpfx Aoga Tzueh Eot Quick-release clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: new, Year of construction: 2026, 🏆🌍WRAVOR WRC 2000 – THE WORLD’S LARGEST HORIZONTAL BAND SAW 💪🏻exceptional heavy-duty horizontal band saw, designed for the sawing of large-diameter logs and demanding industrial applications. 💪🏻massive construction, outstanding rigidity and high cutting capacity 👉🏻 the highest level of heavy-duty horizontal band saw technology. ⚙️ when size, strength and precision matter – WRC 2000 delivers: 🔹 Up to 2,000 mm wheel diameter 🔹 Designed for large-diameter exotic, hardwood logs 🔹 Extremely robust and rigid construction 🔹 Heavy-duty components for demanding sawmill operations 🔹 High cutting capacity and excellent stability Kodsztp A Eopfx Ah Esdt 🔹 WRAVOR technology – reliable, durable quality 🔩WRAVOR WRC 2000 – built for the biggest logs and the toughest sawing conditions.

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Ksdpfx Aoxlnpneh Eedt

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg Kdodpfx Ahoxaa S Rs Est dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: good (used), Year of construction: 1980, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm Kdsdovyzinjpfx Ah Est -Weight: 142 kg

Condition: new, For technical specifications, see the PDF file. Kodpfx Ahjxp Hyge Ejdt

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop Kdsdow U U Uwjpfx Ah Eot - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: new, input voltage: 400 V, control type: manual, overall weight: 85 kg, Equipment: CE marking, Simple, ergonomic, and economical metal band saw EBS 128 CL by BERNARDO. Angle cutting is possible from -60° to +45°, adjustable via the saw arm. Cutting capacity at 90° up to 125 mm (flat piece 150x100 mm). The main advantage of this saw, besides setting the cutting angle with the saw arm instead of repositioning the material, is the integrated cooling system as standard. This makes the EBS 128 CL an ideal choice for semi-professional craftsmen – combining performance, ergonomics, and ease of use. Key features: • Mitre cuts possible within the range of (+45° to -60°) • Stepless adjustment of the saw arm with a hydraulic cylinder • Automatic end-of-cut shut-off – limit switch • Robust, torsion-resistant saw arm • Three cutting speeds adjustable by V-belt drive Kdodpfx Aheyr Nq Uj Eet • Sturdy machine frame guarantees precise, quiet, and vibration-free operation • Supplied as standard with quick-action vice and workpiece stop • Standard integrated coolant system • Equipped to the latest safety standards with a separate emergency stop button (CE compliant) Technical Specifications: Cutting capacity round 90° 125 mm Cutting capacity flat 90° 100 x 150 mm Cutting capacity round 45° R 95 mm Cutting capacity flat 45° R 95 x 76 mm Cutting capacity round 60° 50 mm Cutting capacity flat 60° 50 x 56 mm Working height 740 mm Band saw blade dimensions 1638 x 13 x 0.65 mm Blade width 13 mm Cutting speed 23 / 35 / 55 m/min Motor power 0.75 kW Continuous rating S1 100% 0.55 kW Voltage 400 V Dimensions (W x D x H) 980 x 550 x 1100 mm Weight approx. 85 kg Scope of Delivery: • Band saw • Quick-action vice • Workpiece stop • Automatic end switch • Mobile machine base • Hydraulic cylinder • Cooling system • Separate emergency stop button (CE compliant)