Section Shear

Geka Minicrop

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Ledpfx Aszzkwmelbjah Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Ljdpfx Aljx Hykvsbjah Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: new, 45 to. no. of strokes 24 Hub/min hole diameter in sheet thickness max. Ø 27 in 13 mm 80x80x8 60x60x6 mm flat steel 300x10/200x13 mm 7 mm engine output 2.2 kW range L-W-H 1550x820x1540 mm weight 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device Ledpfjyv N Ayjx Albjah

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter Laedpotycdkjfx Albeh - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm Laedob U Hwtepfx Alboh ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 28 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 140 rpm, bed width: 135 mm, overall weight: 160 kg, OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA – professional metalworking machinery For over 12 years, we have been supplying metalworking machines to customers throughout Poland and Europe. We focus on quality, precision, reliability and professional technical support. MTP TYTAN 750 PREMIUM UNIVERSAL LATHE – 0.75 kW / 230 V WITH STEADY RESTS The MTP TYTAN 750 PREMIUM is a robust and precise universal lathe designed for workshops, production facilities and training centres. It is suitable for external and internal turning, longitudinal and facing operations, drilling, taper turning, and cutting metric and imperial threads. FEED AND THREADING GEARBOX The machine is equipped with a mechanical feed and threading gearbox with two gear-selection levers, allowing the operator to quickly and accurately select the appropriate transmission ratio for the required operation. A clear feed, threading and gear-selection chart is located directly on the front of the machine, making it easy to select the correct lever positions and change-gear configuration. Combined with precise synchronisation of the lead screw with the main spindle, this system enables accurate and repeatable cutting of metric and imperial threads. The machine bed features double-prismatic guideways, providing high rigidity, stable carriage guidance and excellent machining accuracy. The PREMIUM version also features a tailstock with an eccentric quick-lock mechanism, allowing fast positioning and secure locking. Thanks to its 230 V power supply, no three-phase electrical connection is required. IN STOCK – IMMEDIATE DISPATCH AVAILABLE! PLEASE NOTE: MACHINE STAND / CABINET IS NOT INCLUDED. TECHNICAL DATA: • Turning length: 750 mm • Max. turning diameter: 265 mm • Bed width: 135 mm • Spindle bore: 28 mm • Spindle taper: MT4 • Tailstock taper: MT2 Lodpfjyuc T Isx Albeah • 3-jaw chuck: 125 mm • Spindle speed: 140–2000 rpm • Metric threads: 0.2–3.5 mm • Imperial threads: 8–56 TPI • Motor power: 0.75 kW • Power supply: 230 V • Dimensions: 1510 × 570 × 580 mm • Weight: 160 kg STANDARD EQUIPMENT: • 125 mm 3-jaw chuck • 4-position tool post • Mechanical feed and threading gearbox • Change gear set • Fixed and travelling steady rests • Set of 5 turning tools, 10 × 10 mm • Self-locking drill chuck • Drill chuck arbor • Jaw set • 2 fixed centres • Chuck guard • Chip guard • Chuck key The robust steady rests provide additional support and stability when machining longer workpieces. SALES CONDITIONS: • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Technical documentation / operating manual • Delivery to the customer can be arranged Transport costs are calculated individually according to the delivery destination. We also invite you to explore the complete range of Metal Technics Polska machines.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm Lajdpfx Ajyk Dicolbsh total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: excellent (used), pressure 50 t Lodpfxjtrhf Aj Alboah throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 132517-100, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, injection pressure: 1,531 bar, injection weight: 44 g, mold height (min.): 150 mm, ejector stroke: 80 mm, opening stroke: 350 mm, plate length: 400 mm, plate width: 400 mm, total length: 3,100 mm, total width: 1,000 mm, total height: 1,800 mm, overall weight: 1,100 kg, heating capacity: 5.5 kW (7.48 HP), pressure: 215 bar, pump power: 7,500 W, power: 20 kW (27.19 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 48 A, Model: Injection Molding Machine Type: PLUS 35 Year: 2010 Ledpfx Asyw Ufvelbeah Weight: 1100kg Control Voltage: 24 V DC Main Motor FLA: 14,7 A Hydraulic System Pressure: 250 bar Manufacturer: Wittmann, Austria

Condition: good (used), punching force: 55 t, – Capacity 55 tons – Hydraulic – 5 stations – Electric backgauge – Central lubrication system – Double-acting – Foot control – Emergency stop – Documentation Laodpfot Rtbgex Albsh – 400V