Used Geka Minicrop for sale (60)

Condition: like new (used), functionality: fully functional, Year of construction: 2007, operating hours: 20 h, machine/vehicle number: 21279, overall weight: 1,800 kg, Equipment: emergency stop, foot remote control, GEKA HYD55 AS new, only used ca 20 hours Punching - 55 ton Shearing - 110 ton Angles - 120 x 120 x 10 mm Cedpfxo Ah Rlxs Agrehd Flat Bars - 300 x 15 mm Bars - Ø40 mm Bars - 40 mm Punching - Ø 40 mm x 10 mm 1000 mm electric lenght stop

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Cedpfxjzzkwme Agrohd Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Year of construction: 1995, condition: used, A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible. Codpfx Agjzybuaerehd

Condition: used, functionality: fully functional, Year of construction: 2007, table height: 1,050 mm, overall weight: 1,090 kg, total length: 1,350 mm, total height: 1,824 mm, HYDRAULIC PUNCHING MACHINES PUMA 55 Technical data: Punching force 55 tons Max. punching capacity Ø 40×10 mm Sheet size S / SD 500 / 750 mm Working height S / SD 1060 / 810 mm Used, fully functional punching machine I flange 100-300 mm I web 100-500 mm U flange 100-300 mm U web 120-260 mm Motor power 5 kW Cycles per minute (20 mm stroke) 37 Maximum stroke 60 mm Chedj Ahp Aijpfx Agred Includes a comprehensive set of punches and dies. The punching machine can be inspected while powered up until November 17, 2026; after that date, it can only be inspected without power. Manual available in German, with diagrams for the electrical connection.

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 1,000 h, machine/vehicle number: 8044, overall weight: 2,070 kg, Equipment: CE marking, documentation/manual, Shearing machine Shearing capacity for flat steel: 450x15 mm; 300x20 mm Shearing capacity for angle iron: 130x130x13 mm (90 degrees); 70x70x7 mm (45 degrees) Cjdpfx Agj Afnqporohd Shearing capacity for round and square bar: 45 mm Punching machine: 800 kN Maximum capacity: ø40x14 mm Power: 9 kW

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 10730, control type: manual, degree of automation: manual, actuation type: electric, overall weight: 2,400 kg, total length: 2,310 mm, total width: 1,200 mm, total height: 2,050 mm, Equipment: CE marking, emergency stop, foot remote control, The machine is used but in working condition. On-site testing is possible. I can send more photos and a video. Sold without warranty or guarantee. Cedez Iwh Aepfx Agrjhd

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Chedpjyk H E Tsfx Agred Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 5065, FLAT BAR SIZE (MIN) 50X5 FLAT BAR SIZE (MAX) 500X20 HORIZONTAL-WING PUNCHES 3 Cjdpfxex Hyq No Agrehd MAXIMUN DIAMETER 40mm PUNCHING FORCE 110tn

Condition: new, 45 to. no. of strokes 24 Hub/min hole diameter in sheet thickness max. Ø 27 in 13 mm 80x80x8 60x60x6 mm flat steel 300x10/200x13 mm 7 mm engine output 2.2 kW range L-W-H 1550x820x1540 mm weight 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device Cedoyv N Ayjpfx Agrehd

Condition: ready for operation (used), Year of construction: 1998, Immediately available, free from insolvency: Motorized swivel bending machine GEKA Type NSJ 1500/2.5 Csdpfxs Aa Iqre Agrshd Year of manufacture 1998 Working length 1500 mm Material thickness 2.5 mm Drive power 3 kW Weight 2.5 tons Complete with all accessories Price: EUR 3,250.00 plus VAT, ex works.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, GEKA Fiber Laser including: RAYCUS 6kW laser source BOCI BLT441 cutting head with automatic nozzle cleaning CNC control system FSCUT8000 Servomotor & axis drive INNOVANCE & YAKAWA Linear guide with rack and pinion drive CYPCUT operating software, nesting software included Electrical and pneumatic components Installation and training Chedjzzk Eqopfx Agrjd

Condition: good (used), Year of construction: 2011, Geka PUMA 110 punching machine, a high-capacity hydraulic punching machine, manufactured in 2011. Csdpfxszw Dcus Agrshd

Condition: used, Year of construction: 2007, puncher 55 t square edge steel 40 mm round bar steel 40 mm Chjdpfx Agez St Risrsd L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 40 x 10 mm shear: flat material 300 x 15 mm throat 250 mm work stroke 60 mm work height max. 1085 mm total power requirement 4,0 kW weight 1300 kg range L-W-H 2000 x 900 x 1800 mm Equipment: - Electro-hydraulic structural steel shears with 4 workstations * Flat steel shears * Structural steel shears * Punch press * Notching station - Driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at the hole-punching

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm Cjdjwiq D Espfx Agrehd 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching Chedpfxsztc Dis Agrjd • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Cjdpfxjzzkybo Agrohd Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: used, Shearing force: 500 kN (punching e.g. 28 mm into 13 mm material) Cuts 200 x 20 mm on the sheet metal shear Codpfx Age Aggdaerjhd Three-point kinematic link Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Large assortment of tools Contact length stop

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg Chjdezurz Hopfx Agrsd

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Codpfozzkxwox Agrohd Maximum stroke 30 mm Weight 295 kg

Condition: used, punching pressure 36.0 t punch diameter 27.0 in 10.0 mm throat 170 mm round bar steel 30.0 mm L-beam 80 x 80 x 8 mm square edge steel 25 x 25 mm shear: flat material 350 x 6 / 200 x 13 mm blade length 356 mm Chodpfx Ags Aa A H Ierjd strokes per minute ca. 24 pro Min work height max. 980 mm oil volume 30.0 l voltage 400 V total power requirement 2.2 kW weight 485 kg dimensions 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Special price upon request Features: - Compact electro-hydraulic structural steel shears - Punching station, flat steel shear, angle/profile steel shear - Sturdy welded construction - Very compact design - Side support surfaces - Various punches and dies (red metal box) - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS Codjzg Dxbjpfx Agrehd • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: - L 90º: 130x130x13mm - Plate: 450x13mm Chedpfx Ageznh Shersd - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge Chedpfx Agoyxpawersd - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm Cjdpfezt Swlox Agrehd - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Csdpfxoudbzye Agrehd Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.