CNC Milling Machine

Geiss ECO FZ

Condition: used, Year of construction: 2005, x-axis 3000 mm y-axis 1200 mm z-axis 750 mm Control S 840 D working area 3600 x 1200 mm feed - longitudinal/cross 0- 75000 mm/min feeds vertical 0- 70000 mm/min spindle turning speed - stepless 100- 40000 U/min spindle motor 6 kW b-axis 285 ° c-axis 520 ° Ppsdpfx Aajycxc Iolel total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 5,2 x 2,3 x 2,5 m

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW Pedpoiyyf Iefx Aaljpl by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Ppsdpfx Aolvu Rujaljl

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Ppedpfxjftzkqj Aalol Any clarification, do not hesitate to contact us.

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Ppjdpfjwih Arjx Aalol

Condition: excellent (used), Year of construction: 2019, X-axis 5,000 mm Y-axis 3,000 mm Z-axis 1,500 mm Table size 5,000 x 2,500 mm Tool holder HSK 63 Tool changer 60 positions Control HEIDENHAIN TNC 640 Including through-spindle coolant (IKZ) 40 bar Podpfxox E S E Nj Aalopl Including simultaneous fork head Including complete documentation Including IKZ 40 bar

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function Pedpowf Eb Rofx Aalepl - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: like new (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, film width: 1,640 mm, pressure: 6 bar, total width: 5,406 mm, total length: 6,840 mm, total height: 3,808 mm, heating capacity: 9 kW (12.24 HP), pump capacity: 60 l/min, - The machine must be dismantled. The conversion costs have already been deducted from the listed price. Ppjdpsxmwl Ijfx Aalol + 2x auxiliary pressurized water units up to 95°C for table tools; 60 l/min pump capacity, 6.3 kW cooling capacity, 9 kW heating capacity + Automatic heating control + Fully automatic central lubrication + Feed unit, standard right + Ejector device for molded parts + Fully automatic central lubrication BSM + 2 loading magazines + Cooling with floor-mounted central blower and 6 adjustable air outlets + Hardware interface for external device

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm Pjdpfx Aaok Tuxdelspl 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Drive motor: 30 kW

Condition: reconditioned (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, Longitud de entrada // Intake length: 2200 mm Anchura de entrada // Intake width: 2000 mm Longitud de rotor // Rotor length: 2000 mm diam. rotor // rotor diam.: 495 mm n.º de cuchillas // n. of knives: 56 (60x60) velocidad del rotor // rotor speed: 125 rpm potencia motor // main motor power: 132 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 14000 kg * Máquina especialmente diseñada para la trituración de plásticos, los rodamientos del rotor están completamente aislados. * Máquina completamente reconstruida; 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Rotor de repuesto - Sujetador superior; ideal para la trituración de residuos voluminosos de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles, asi como plano de soporte de máquina y tolva de alimentación - Manual de instrucciones & esquemas eléctricos Includes: - Machine supplied with bridge breaker (upper feeder); suitable to shredd bulky waste with low density - Machine fully refurbished; 1 year guarantee or 2000h, whatever happens first Ppedpfx Aoi Elyljalel - Machine specially designed for shredding of plastic waste. - Steel support - Infeed funnel - Electric control pannel - Dimmensional drawings available in Acad for the machine, funnel and steel support - Operation & maintennace mannuals available