Piston homogeniser

GEA NS 2006 H

Condition: excellent (used), functionality: fully functional, APV / RANNIE 30.60 ID.NO. 2802 Gsdpsumbwnjfx Akysbu Apv / Rannie mod 30.60 homogenizer for the production of e.g. Mustard, Sauces, Mayonnaise etc. Capacity approximately 2000 lit / hour, Max pressure 220 bar year mod 1994. Dimensions 130 x 90 cm Height 145 cm.

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares Gbjdjw Ulc Espfx Akyeu

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Made in Poland Machine available to view and test at the firm's premises. Gsdpexx Uihefx Akyebu Jedliński Packaging sp. z o.o. ul. Wodna 3 05-090, Raszyn Poland

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 7,000 kg, operating pressure: 220 bar, pressure (max.): 220 bar, number of previous owners: 1, Equipment: documentation/manual, type plate available, Manufacturer: GEA / Niro Soavi Model: NS 5160 H Gbodevvmzzopfx Akyou Year of manufacture: 2004 Capacity: 10,000 - 20,000 l/h Max. operating pressure: 220 bar Number of pistons: 5 pistons Number of stages: 1 stage Including control cabinet (in excellent condition, recently renewed) Condition: very good

Condition: like new (used), Year of construction: 1999, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 87.99.167, pressure: 50 bar, pressure (max.): 65 bar, input voltage: 400 V, type of input current: AC, Homogenizer Test Plant - Very Little Operation Was used in a test and pilot plant. Originally designed for homogenizing cream cheese (UF concentrate from feta production) Gbsdpfx Asway Rpskysu Capacity approx. 400 l/h Drive pulley conversion kit for up to approx. 700 l/h included Machine fully functional and in good working order.

Condition: good (used), Year of construction: 2005, GEA Niro NS2006P piston homogeniser Gbjdpfx Ajw Ulcrokyeu Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Gbsdpfjx Tdyzox Akysu Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Year of construction: 1989, Manufacturer : Rayneri / VMI Model : Ultramix ME 120 RB Gbjdoyzt Uqopfx Akyou Type: Stirrer - Mixer on stand Year: 1989 Agitation : rotor stator Motor power: 1.5 kW – 1,500 rpm Speed variation: mechanical Adjustment of the height of the mixing head from the floor: 0–85 cm Length of stirring shaft: 90 cm Up and down: manual with counterweight Leg clearance: max. 70 cm Machine dimensions: W 100 x D 130 x H 230 cm

Condition: used, Year of construction: 2016, max. workpiece length 4500 mm Godpfx Akozn Ahwsyebu profile spindle 1 Stück main drive 19,2 kW MASTERWOOD 4 WIN 2.0 CNC Machining Center with automatic loading and unloading ----- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimal tool loading - Simultaneous loading of up to 6 workpieces - Patented clamping system for optimal machining of workpieces - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic re-clamping for switching between exterior and interior profiling - INTEGRATED window manufacturing software, meaning the machine does not have to (but can, of course) be controlled from the office using external industry software. - Powerful 19.2 kW HSK-63 E motor - Loading and unloading conveyors - Auxiliary table for round arch production and door panel machining Request a quote and see for yourself this unbeatable value for money! VIDEO of an identical machine attached! For sale on behalf of a client Technical specifications provided by the client (Technical specifications according to the manufacturer—subject to change!)

Condition: ready for operation (used), Year of construction: 2019, Capacity: 200-800kg/h. The machine is used for the production of stretched curd. Includes: Rising bowl: Prima, cutting device: Prima, lifting and tilting device: Frontmatec Hygiene - for holding 200 and 300 liter standard loading trolleys for efficient use in the food industry. Gbsder Dcihspfx Akyou