Front processing center

Gannomat Vector

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. Hedpfx Afszp Edwo Ssu All specifications according to the manufacturer.

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Hsdpfjg Tu Rkjx Af Sju Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Hodpfx Aodlhbpjf Sou Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 volts

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act. Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for storing liquid fertilizers as follows: The storage tank is equipped with a brand-new plastic inner liner on the inside, which is resistant to storing liquid fertilizers. An acoustic leak warning device is mounted outside in a protective box (lockable). The storage tank additionally has a double-walled steel construction. The plastic inner liner has a general building inspection approval. It is therefore suitable and approved for storing liquid fertilizer AHL as well as NOX reduction agent AUS32 AdBlue. Hsdpfx Afoc Nk Enj Seu Nominal capacity: 50 cubic meters Quantity: 1 Used, but fully overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL paint; however, you can also specify your own color preferences at any time. Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 filling nozzle, 3 inches, V2a stainless steel, newly installed Quantity: 1 new acoustic leak warning device for the double wall Quantity: 1 ladder Quantity: 1 suction line, 3 inches, V2A stainless steel, newly installed Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 10,900 mm Diameter approx. 2,500 mm Weight approx. 9,000 kg Storage: Above-ground Excellent offer. Liquid fertilizer - AHL tank systems in sizes from 5,000 to 100,000 liters. Water tanks, fire water tanks. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer a cost-effective delivery upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please do not hesitate to call us. One of our experienced employees will be happy to advise you. Price/Shipping The price for the tank system applies ex works Warstein, unloaded free of charge. Delivery can be offered at a reasonable price for an additional fee. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Year of construction: 2023, Dear customers, Hjdpfx Afoku Aibs Sju For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. Hedpfshh Sprsx Af Sou The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 3,800 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 35 - 40 kg/h Forced air output: 9,400 m³/h Exhaust outlet: Ø 700 mm Hjdpfx Aedlhcrof Seu Flue gas connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 volts

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes Hsdpoxg El Aefx Af Sou In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. Hedpfx Ajggx E Dsf Seu ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately Hjdpfx Aoc Nkyzsf Ssu You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein