Hydraulic press

G + K O.K.Z.- 1300 KN

Condition: used, mileage: 48,223 km, power: 115 kW (156.36 HP), first registration: 07/1992, overall weight: 10,500 kg, fuel type: diesel, color: orange, tire size: 12,5 r20 mpt, gearing type: mechanical, operating hours: 3,262 h, machine/vehicle number: 3765, Equipment: all wheel drive, crane, differential lock, hydraulics, 1 used UNIMOG 1650 with Hiab 120 loading crane Internal number: 3765 First registration: 04/92 Ijdpfxofh Nbcs Ahvstd Read operating hours: approx. 3,241 Recorded mileage: approx. 47,821 km Power: 115 kW / 156 HP Permissible total weight: 10,500 kg PTO at bottom 2-circuit hydraulics 24 V electrics Tyres: 12.5 R20 MPT Hiab 120 loading crane 4x hydraulically extendable, radio remote control Lifting capacities: 2.0 m – 4,400 kg 10.1 m – 850 kg 4.6 m – 2,130 kg 11.9 m – 700 kg 8.2 m – 1,080 kg The very low-mounted crane frame ensures excellent stability of the UNIMOG, resulting in very high lifting capacities at the crane. This offer is non-binding. Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Isdpswub Hbjfx Ahvjtd Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Year of manufacture: 2001 Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Itjdpfev Rmkxjx Ahved

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Itedpfeftdv Uox Ahvod Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Isdstiwgiepfx Ahvjtd

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: VIN 945232383, Offering a Fendt tractor, year 2014 For sale: Fendt 936 Vario Profi Plus agricultural tractor, 2014 production, fully operational and in very good technical condition. Ready for work. Power: 360 HP Vario stepless transmission Profi Plus equipment version with 10-inch terminal Front tyres: Agri Max Force IF 600/70R34 Rear tyres: Agri Max Fortis 710/75R42 Factory GPS navigation with RTK signal Iodpfx Ahsxwb Izjvotd VIN 945232383 Highly recommended!

Year of construction: 2008, condition: ready for operation (used), Single hopper vibropress with full circulation, 2008. The line includes : - Rotho dryer for 2,970 places, - pallets (bretts) 1400x1100, - Sicoma MP2250 / 1500 mixer, - charge for 4 materials for production, - silos 120 and 60 tons, - over a dozen forms, mainly produced by Rampf Formen The line has been operating since 2009, only 5 days a week. It is used for the production of ceiling blocks and concrete blocks. Itedpoiwa H Dsfx Ahvjd The line layout was built under the existing hall so it does not take up much space.

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm Itsdpfslp U Dpsx Ahvod weight of the machine ca. 9 t

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Itedped Swtasfx Ahvsd Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Isdpfx Ahsw R Uzijvetd