Tailstock

Fritz Werner Spitzenhöhe verstellbar

Condition: used, mileage: 95,103 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 2,800 kg, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, first registration: 11/2013, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, CO₂ emissions: 190 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2013, total length: 4,892 mm, construction height: 1,970 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, Engine damage. The Volkswagen T5 Transporter 2.0 TDI is a used vehicle with engine damage and was first registered in November 2013. The vehicle has a mileage of 95,103 km and is equipped with a 2.0-litre diesel engine delivering 62 kW (84 hp). It complies with the Euro 5 emissions standard and features a manual 5-speed gearbox. This model is available in Ginstergelb (R1032) and offers seating for three occupants. The specification includes two sliding doors (left and right), as well as a wooden panel in the rear for securing cargo. With practical truck registration and a permissible gross vehicle weight of 2,800 kg, this Transporter is well-suited for commercial use. The T5's fuel consumption is 7.2 l/100 km (combined), 9.4 l/100 km (urban), and 6.0 l/100 km (extra-urban). The vehicle emits 190 g/km CO₂ and is fitted with a green emissions sticker (Class 4). Viewings are possible on weekdays from 8:00 am to 5:00 pm and on Saturdays from 9:00 am to 2:00 pm without an appointment. Sale only to businesses (agricultural, freelancers, small and large enterprises) or for export. Subject to error and prior sale. Fgsdotfa Rwepfx Ab Tek

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - 18 mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg Fedoqv Iw Tspfx Ab Togk dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm Fodpsd D D Hlofx Ab Tegk inclination up to 135 hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Fgodpfx Absfh R N De Tek Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: reconditioned (used), Year of construction: 1984, Machine is modernized in 2015. Drilling capacity max. 20 mm Tool taper 2 MK speed 355/710/1400/2800 rpm spindle stroke 100 mm spindle throat 210 mm headstock adjustment 250 mm max. distance spindle-table 445 mm Fsdpogqukfofx Ab Tegk table surface 340X280 mm connected load 1,1 kW weight 0,165 t space requirement LxWxH 0,6 x 0,5 x 1,3 m

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table Fgjdpjphl Ecofx Ab Tok - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. Fgodpfxjxflxas Ab Tek No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: ready for operation (used), Distance between centers: 4000 mm Center height: – over bed 650 mm – in bridge area: 800 mm Swing diameter: – over bed 1200 mm – over cross slide 1000 mm – in bridge area 1600 mm Platform: 1200 mm Bore diameter: 140 mm Speed: 2–800 rpm Bed: – bed width 650 mm – longitudinal slide length 820 mm – total cross slide travel: 600 mm – upper slide travel: 300 mm GIVI 3-axis digital readout Electric motor 28.5 kW Dimensions: 6325 x 1400 mm Fgjdpfx Abjxq E D To Tsk

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Fjdpjuy S Hbjfx Ab Tjgk Spindle speeds -12'000 rpm Tool changer 20 Pos. Control FANUC 18i-MB Coolant through spindle misc. accessories MARCELS MASCHINEN CH

Condition: used, diameter div. number 56x Fsdpfxjwtrzyo Ab Tegk tool adaptor BT 40