Tapping machine

Flott TB6

Condition: excellent (used), Flott TB 6/II high speed bench drill/ct1477 Manufacturer: Flott Type: TB 6/II drill chuck 3-8 mm. Working height 22 cm Manual speed control with stepped pulleys, Cqnvdvxgut 6 speed levels Drill speed: 900-9000 r/min Weight approx: 80 kg

Condition: used, bore capacity in steel (diameter) 6.0 / 10.0 mm throat 200 mm bore stroke 60.0 mm spindle taper B 12 table: 280 x 260 mm turning speeds 430 - 9000 U/min Bmfu9Saw8Qo column diameter 70,0 mm total power requirement 0.45 / 0.60 kW weight 95.0 kg range L-W-H 450 x 300 x 880 mm from a vocational training center (!!) Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual * Machine link: ?machineno=1008-9093645

Year of construction: 1986, Condition: excellent (used), Dimensions LxWxH: approx. 450x300x1700mm Caesxes90U Maximum drilling depth: 60mm Maximum workpiece height: 350mm Table dimensions: 250x250mm Speed: 430 - 9000 rpm. (12 speed levels) 2 motor steps Speed adjustment via V-belt Drill chuck included Inclusive 16 A connection plug Inclusive base frame

Condition: new, Year of construction: 2024, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Uezty2Thlz Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: used, Year of construction: 1984, Center height: 180 mm, Center width: 1,000 mm, Woodturning machine FLOTT type DB 180 D serial number 483001 / 30830004, year of manufacture 1984 Technical data: Center height 180 mm Center width 1000 mm 5 speeds 600/960/1220/1750/2800 rpm Spindle holder M 33 DIN 870 Spindle holder MK 2 Tailstock taper MK 2 Power supply 380 V, 50 Hz Motor power 0.55 kW Weight approx. 67 kg Dimensions approx. 1600 x 550 x 1100 mm With B3Q3C3302C - with rotating center point - Chisel support - face driver - drill chuck with insertion spigot used, in good condition

Year of construction: 1986, Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column Bc9U38Yiz2 - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition

Condition: used, bore capacity in steel (diameter) 14 mm throat 200 mm bore stroke 60 mm morse taper 1 MK table: 280 x 260 mm Dpsy8Z turning speeds 430 - 4500 U/min column diameter 70 mm weight 100 kg

Condition: good (used), Year of construction: 1985, Drilling capacity in steel St 37 30 mm Drilling capacity in GG 35 mm Drill spindle holder MK 3 Speed range 75 - 1600 rpm. 3 feeds 0.1 - 0.2 - 0.3 mm/rev Cgdrhpka8D Spindle projection 300 mm Spindle stroke 150 mm Table size 420 x 380 mm Column diameter 130 mm Motor power 1.5 kW Dimensions L x W x H 700 x 450 x 1820 mm Machine weight 350 kg Accessories / Special features: - 3 feeds - Speeds via quick belt adjustment - Large drilling depth adjustment with 150 mm fixed stop - Swivel table - Emergency stop switch - Lighting The following work was carried out by us: - Repositioning of the drill spindle - New return spring - Gearbox resealed - Oil change Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Ytpkzwdc8 Weight approx.: 85 kg Space requirement: 720 x 470 x 400 mm

Condition: new, Year of construction: 2024, Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Uaw0Nhfypn Cutting speed (m/min) 20 - 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically designed, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in slide bearings Clear control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest cutting accuracy requirements Synchronously driven chip clearing brush Semi-automatic sawing cycle: fully hydraulic Hydraulic cutting feed incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic full stroke cylinder for clamping vice (pull-down version) Floating clamping vice Band tension and saw band breakage monitoring Chip collection trays, easily removable Hydraulic band tension indicator Integrated coolant supply (30 l tank capacity) ffLED work light Digital mitre display Incl. saw blade combi toothing 3/4 Machine color:- Saw frame RAL 7035- Machine body RAL 7005 12 months warranty for single-shift operation Free delivery incl. packaging Please ask for further accessories. Delivery time: immediately from stock. NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: used, Drilling capacity: 28 mm, Drilling depth: 150 mm, Column drilling machine FLOTT type SB 23 S Technical data: Drilling capacity 28 / 32 mm Spindle holder MK 3 6 spindle speeds 100 - 1000 rpm. Drilling depth 150 mm Manual feed throat depth 300 mm With - foot control used, in good condition Bmqzqfp083R

Condition: excellent (used), Double sanding block Make Flott Type STS 300 Grinding wheel diameter 300 mm width 40 mm 380 Volt 1400 watts Cty2Pwuyrq Width 820 mm Depth 560 mm Height 1160 mm without pallet Weight 160 kg

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] Dpryjp - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: excellent (used), A very good and well-maintained drill from FLOTT is for sale. The speed display and the depth gauge work perfectly. Cxysejs7My The drill spindle has a concentricity of 0.02-0.03mm. Operating instructions are also available. The machine can be inspected and tested on site by telephone arrangement.

Condition: used, dimensions ca. 800 x 400 x 1300 mm dimensions of grinding wheel 250*40*51 mm Dpoorx power capacity - grinding motor 1,3 kW Double grinding stand

Condition: new, Year of construction: 2024, Standard equipment: With swivel head (left/right) for miter cuts, two speeds, Sturdy cast iron construction of the machine housing, Reduction gear in oil bath, consisting of bronze wheel and hardened, hardened, ground steel worm. Dps8Qj Quick-clamping vice with counter-clamping device for double workpiece clamping. Durable, mechanical coolant pump Adjustable length stop Operating tool Machine color: RAL 7037 Technical data KS 315 M Motor three-phase current 400 V, pole-changing (kW) 1.3/1.9 Vice clamping width (mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine dimensions with base frame (mm) 1,000 x 1,100 x 1,800 Machine dimensions 12 months warranty for single-shift operation Not included in the scope of delivery: Saw blade (mm) Ø 315 x 32 Steel base frame

Condition: ready for operation (used), Column drilling machine make FLOTT type SB 16 L Machine # 271500124 Technical data: Drilling capacity 16 mm spindle mounting MK 2 5 spindle speeds 340 - 2400 rpm. quill stroke 100 mm Dko0O9 table size 340 x 280 mm throat depth 240 mm drive power 0,75 kW column diameter 82 mm dimensions approx. 400 x 700 x 1800 mm weight approx. 130 kg with - drill chuck - drilling depth indicator used, in good condition

Condition: good (used), Year of construction: 1989, Machine/vehicle number: 35 120 207, Offer 24136 Technical data: - Drilling capacity - in steel 15 mm Cm29V3Gb78 - in aluminum 23 mm - Drill spindle holder B 16 DIN 238 - Drilling depth 60 mm - Spindle / column projection 185 mm - Drill spindle speed infinitely variable 400 - 4500 rpm - Drive 220 V 0.55 kW - Drilling table 220 x 300 mm - Distance drill spindle / table approx. 160 - 360 mm - Space requirement approx. W 280 x H 600 x D 600 mm - Weight approx. 55 kg - Quick-action drill chuck - Table base approx. W 700 x H 700 x D 700 mm - Table top approx. 300 mm

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 23 mm throat 235 mm bore stroke 100 mm taper MK 2 MK Bhshuals3E table-size 340 x 280 mm feeds mm/U turning speeds 125 - 2250 U/min total power requirement 0,8 KW weight of the machine ca. 0,25 t dimensions 0,8 x 0,6 x 1,85 m Stepless speed Digital speed display Digital depth display

Condition: used, Year of construction: 1982, bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm Ibp3Pz272 table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice

Condition: used, Bench drill, incl. base cabinet, swivel drill head ----- Technical data ----- Number of speeds: 5, Drehzahlbereich: 480/730/1160/1800/2800, Drill chuck: 1-13, Dimensions (LxWxH): 500x6001400 Sold as is, without technical inspection Dpicll

Condition: new, Year of construction: 2024, Spindle speed infinitely variable electronic 40-4000 1/min Spindle holder MK 2 Table height adjustment with toothed rack Tapping capacity max M8 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/ by hand Table height adjustment with toothed rack Continuous/standard drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm throat depth 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Bhh7Pvkg Weight 62 kg max distance spindle/table/foot 300/ 360 mm Motor alternating current with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping width max 120 mm - Quick-action drill chuck 1-13 mm holder B16 - Taper arbor MK II/B16 - Reducing sleeve MK II/ MK I Price: € 320,- Factory guarantee: 3 years Free delivery including packaging (Germany only) Delivery time: immediately from stock

Condition: good (used), Technical data: Tool holder MK 2 Drilling capacity in ST 14 mm . 2 speed ranges stepless approx. 650 - 2000 rpm 1300 - 4000 rpm . Bxqpskuuc3 Intermediate table , W x D approx. 280 x 250 mm

Condition: good (used), Year of construction: 2006, Travel distance X-axis: 700 mm, Travel distance Y-axis: 400 mm, Travel distance Z-axis: 400 mm, Manufacturer: Flott Type: BC 40 Super Year of manufacture: 2006 Buprkzo3B8 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: new, Year of construction: 2024, - FLOTT SB 20 FB plus flow forming machine - Tapping unit - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug Flow forming for the production of pull-throughs in thin-walled metallic materials, Flow forming capacity with 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with toothed rack - Stepless spindle speed (rpm): 20 - 4,000 - Dimensions (mm): 355 x 705 x 1825 For further TECHNICAL DATA, please refer to the product sheet! Dpgjp9 3-year guarantee for single-shift operation Delivery: free domicile including packaging (Germany) NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER