Vertical machining center

FIRST MCV 1500

Condition: used, Year of construction: 2008, x-travel 1500 mm y-travel 800 mm z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min Chedpfxjux Agvs Ab Tjf table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 total power requirement kW weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 Chsdpfxewwwqhs Ab Tsf weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. Chsdpswk Nm Iofx Ab Tof SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 Chjdpfx Ajw Eyg Iob Tof no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm table load 200 kg weight of the machine ca. 4,0 t dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - electr. hand wheel - new spindel in 2015

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Cedpewl Inmofx Ab Tshf Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Chjdpfxsv H Dgpo Ab Tjf

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: Chsdpfx Aewbvhajb Tjf - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Codpfx Aov I U Iysb Tjhf

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - Type of divisor : 4e axe CNC intégré Chodpfsvt Eifex Ab Tof * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Chedpfx Aorx S Hnsb Tef