Drill with magnet

Fein PS 50 R

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Ihjdpfx Ahsulaxhe Nst

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" Ihjdpfxjdzw Hwe Ah Net space requirement: 850 x 640 x 780 mm

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m Ihjdpfsfv Attjx Ah Nst

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer Iedevz Abhopfx Ah Nsht 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz Ihodpfxswki Apj Ah Not - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, machine/vehicle number: 1-1, thickness of jaw:125 mm Ihjdpfx Ahecxxl Aj Not weight of the machine ca.:30 t clamping width:205 mm

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Isdpfx Aecirnijh Nsht Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 Working surfaces: 5 pcs. Intermediate plates: 4 pcs. Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm Ijdpfx Ahsxn Um Eo Neht 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Good technical condition of plates and hydraulics

Condition: good (used), Year of construction: 1980, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 1,330 mm, table load: 10,000 kg, table length: 1,700 mm, table width: 1,520 mm, incl. universal milling head incl. spindle extension incl. angle plate height 1400 mm incl. digital read out sytem X - Travel: 1985mm Y - Travel: 1620mm Ihjdpfx Ahswrn Imo Nst Z - Travel: 1330mm W - Travel: 410mm Table Length: 1700mm Table Width: 1520mm Table load: 10000 Speeds / ranges:2,5 - 1000Rpm Spindle Taper: iso 50ISO/Bt/Mk Length: 460mm Width: 4800mm Height: 6000mm Weight: 25000kg

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Ihedeu A Igcspfx Ah Net