Universal lathe machine
FAT TUR 630M x 2000

Year of construction

2025

Condition

Used

Location

Bydgoszcz

Universal lathe machine FAT TUR 630M x 2000

Show map

Machine data

Machine type:: Universal lathe machine

Manufacturer:: FAT

Model:: TUR 630M x 2000

Year of construction:: 2025

Condition:: refurbished (used)

Functionality:: fully functional

Price & Location

Location:: ul. Kolbego 40, 85-433 Bydgoszcz, Polska

Call

Technical details

Spindle bore:: 90 mm

Turning diameter:: 630 mm

Turning diameter over bed slide:: 630 mm

Turning diameter over top slide:: 380 mm

Turning length:: 2,000 mm

Total length:: 3,900 mm

Total width:: 1,420 mm

Total height:: 1,590 mm

Overall weight:: 3,400 kg

Workpiece weight (max.):: 1,500 kg

Details about the offer

Listing ID:: A3932286

Update:: 16.05.2025

Description

The universal lathe FAT TUR 630M/2M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements.

The machine is covered by a full 12-month warranty on spare parts and electrical components.

Availability: on stock available, under power, technical inspection anytime after appointment

Technical specifications:

- distance between centers/turning length: 2000 mm
- turning diameter over bed: 630 mm
- turning diameter over support: 380 mm
- spindle bore diameter: 90 mm
Hnjdpfsd Ead Tsx Ah Nsg
- maximum workpiece weight between centers: 1500 kg
- number of spindle speeds: 21
- range of rotational speeds (rpm): 18 - 1800
- range of feeds (mm/rev):
longitudinal: 0.05 – 3,26
transverse: 0.25 – 1,63
- engine power: 15 kW
- overall dimensions:
total length: 3900 mm
width: 1420 mm
height: 1500 mm
total weight: 3400 kg

Standard equipment: tailstock, coolant pump, tool post, chuck cover

Additional equipment available at extra charge:

- 3- or 4-jaw chucks, various diameters and variants
- Digital readout on 2 axes with assembly and calibration
- Steady rest, 10-140 mm, with rollers
- Steady rest, 10-180 mm, with rollers
- Steady rest, 140-300 mm, with rollers
- MULTIFIX quick change tool post

Seller

Registered since: 2018

35 listings online

Call

Send inquiry

Telephone & Fax

+48 52 30... show

These listings may also fit your interest.

Listing

Concordia Sagittaria

18,491 km

Straightening press
AXAP110 MR 110 Ton

Call

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Hnjdjfh R N Djpfx Ah Neg Piston descent speed : mm/sec 23 Tank capacity : litres 30

See details

Listing

DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 DEMAG

Stenay

18,788 km

DEMAG Overhead Crane – 16 Tons Capacity – Year 2018
DEMAG

Call

Condition: used, Year of construction: 2018, DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 Manufacturer DEMAG Cranes & Components GmbH – Germany Type Industrial motorized overhead travelling crane – single or double girder Industrial Applications Heavy-duty lifting in steel plants, fabrication workshops, boiler-making, general machining, and logistics warehouses Main Technical Specifications: - Rated capacity: 16 tons (16,000 kg) - Year of manufacture: 2018 - Manufacturer: DEMAG – global leader in industrial lifting - Motorized travel on rails - Electric wire rope hoist (DEMAG standard, high capacity) - Power supply: industrial three-phase - Control: pendant or radio remote (depending on configuration) - Condition: used – recent, robust design 🧩 Machine Usage The DEMAG 16T overhead crane is engineered for heavy-duty lifting in demanding environments. Its high capacity and modern design ensure efficiency, safety, and long-term performance. ⚙️ Features / Differentiators Hsdpfx Ahexb D Nve Neng - Medium-high capacity (16T) for heavy industrial operations - Recent build (2018) compliant with modern safety standards - Integrated DEMAG hoisting and electrical systems - Compatible with automation and remote-control options

See details

Listing

Gurutzpe Lathe super M 300 x 3000mm e.p Gurutzpe Super M 300 x 3000mm e.p

L'alcúdia de Crespíns

19,597 km

Gurutzpe Lathe super M 300 x 3000mm e.p
GurutzpeSuper M 300 x 3000mm e.p

Call

Condition: used, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 600 mm, Manufacturer: Gurutzpe Model: Super M 300 Admissible dimensions: Distance between centers: 3,000 mm Diameter over bed: 600 mm Diameter over carriage: 360 mm Diameter over gap: 780 mm Bed width: 415 mm Spindle bore: 72 mm Speeds: 18 speeds available: from 16 to 1,000 rpm Motor: Power: 10 HP Hnsdpfx Ahjwtwqao Njg Equipment: Fagor digital readout Quick-change toolpost 4-jaw self-centering and adjustable chuck Steady rest General condition: Lathe in good condition

See details

Listing

Centrifugal evaporation unit Centritherm CT-6

Hradec Králové

18,115 km

Centrifugal evaporation unit
CentrithermCT-6

Call

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: Hnsdpfx Aslc Dwvjh Nog 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

See details

Listing

Shildon

18,488 km

Center lathe
ColchesterMastiff 1400

Call

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady Hjdpfx Ahowga Eye Nsng

See details

Listing

Conventional Lathe - Sinus 400/1500 D Knuth Sinus 400/1500 D

Wasbek

18,194 km

Conventional Lathe - Sinus 400/1500 D
KnuthSinus 400/1500 D

Call

Condition: new, The Sinus 400/1500 D, a top-tier model in the Conventional Horizontal Lathes category and part of the Engine Lathes product group, exemplifies robust engineering and innovative design. KNUTH has crafted this universal lathe with a sturdy one-piece cast machine bed, ensuring high accuracy and low-noise operation even at elevated cutting power. The lathe features a removable bridge allowing machining of large parts with diameters up to 1035 mm, alongside rapid feed capabilities across two axes for swift positioning. Additional highlights such as its manual multi-disc clutch, hardened guideways, and well-designed safety functions further enhance its performance and reliability in various machining applications. This Engine Lathe is equipped with essential accessories like a 3-axis position indicator and a comprehensive toolset for operator convenience. For those looking for a high-performance lathe capable of handling demanding tasks, the Sinus 400/1500 D is the optimal choice – request a quote today! Hodpfoq Rdp Aex Ah Neng

See details

Listing

Mierlo

18,605 km

Universal lathe
RogiWL560x1500

Call

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter over bed slide: 560 mm, turning diameter over top slide: 356 mm, center height: 280 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, type of input current: three-phase, three-jaw chuck diameter: 320 mm, Centre length ----- 1500 mm Centre height ----- 280 mm Swing diameter ----- 560 mm Main spindle bore ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 kW INCLUDES * 3-axis digital readout by SINO * Multifix quick change tool post type TOOC3 with 4 tool holders Hodpfoga Tvlox Ah Nsng * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Face plate * Fixed and travelling steady rest * LED work light * Coolant system * Box with various tools

See details

Listing

Vacuum pump 1000m / h Busch R5 RC 1000 B

Borken

18,513 km

Vacuum pump 1000m / h
BuschR5 RC 1000 B

Call

Listing

Lead/traction spindle lathe VDF BÖHRINGER DUE 630

Ulm

18,580 km

Lead/traction spindle lathe
VDF BÖHRINGERDUE 630

Call

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 01093.01-808, A used L&Z lathe, manufacturer: VDF BÖHRINGER, type: DUE 630, year of manufacture: 1986, machine number: 01093.01.-808. Turning length: 3000 mm Turning diameter: 630 mm. Equipped with 2 steadies, chuck, faceplate, and Multifix toolholder. Hsdoxd Df Nspfx Ah Njng

See details

Listing

Germany

18,260 km

Center Lathe
PINACHOSC 200-42-1000

Call

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Hjdpfx Ahovav Sde Nsng Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

See details

Advertise here