FANUC Roboshot S150iA

FANUC Roboshot S150iA

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, screw diameter: 36 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz • selection unit: no • beam spacing: 560 x 510 • single platen: yes Dsdjx S Slcopfx Aaaeki

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Dkedpfsw R Dg Uox Aaaoi

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Dkjdpfstpf N Usx Aaasi - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: Dkjdpfewtgltsx Aaasi 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Condition: good (used), Year of construction: 1992, Fanuc Dkedjh R Npxspfx Aaaei Fanuc car sheet AC 100 Closing 100 tons Year 1992

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: SOMOS / Mann + Hummel mit Fördergerät Typ: T200 MC2 Baujahr: 2014 Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Trockenlufttemperatur: max. 200° C Dedpfx Aaeiq Ng Rjaeki

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Dkjdpjuk I Etofx Aaaoi

Condition: like new (used), Year of construction: 2011, operating hours: 1,342 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Djdpfx Aaotmtnlsajki Screw size: 16mm Max opening distance: 160mm Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Mold ring size: 100mm Bulkhead volume: 10cm3 Shot weight: - Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m Dodpfx Aaow U N Ixoajki ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN Dedpjwzy N Usfx Aaaski • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg