Vertical machining center

FANUC A04B-0102-B133#BBH

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm Bwedeyvvt Sopfx Afmop max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Bwsdeufp Svspfx Afmep Parts shown by hand not come.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Number of Trays 40 Total machine load 20,000 Kg Bwodjrgqw Ejpfx Afmop Tray Dimensions width - 2450mm x 864mm depth Machine Dimensions 7550mm x 2780mm x 3074mm These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas Bsdsrx Rxtepfx Afmswp For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. Bwsdpfx Aexz Rdajfmep DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, Bwjdjbql S Hjpfx Afmop SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Bwedpfx Aeykikxjfmsp Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm Bwsdpjyf Ehiefx Afmsp 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] Bjdpfxjxlum Ho Afmewp - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 27854 [h] - Number of working hours : 20213 [h] - Number of spindle hours : 13158 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,963 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D sl Operate, overall weight: 11,800 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 5, This 5-axis DMG MORI DMU 65 monoBLOCK was manufactured in 2016. It features an impressive X-axis travel of 735 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful spindle speed of 15,000 rpm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Spindle: power 21 kW (40% ED) / 16 kW (100% ED); torque 111 Nm (40% ED); pull stud DIN 69872 • Table: Rotary table (C-axis) Ø650 mm integrated in rigid table 800 x 650 mm Bjdpfszd T Sfox Afmjwp • Swivel/rotary axes: A-axis +120° / -120° from 0°; C-axis 360°; A-axis torque/holding 3,400 Nm (100% ED); A-axis hydraulic clamping holding torque 6,200 Nm; C-axis torque/holding 2,000 Nm (100% ED) • Feed/rapid: Rapid traverse X/Y/Z 40 m/min; max feed X/Y/Z 40,000 mm/min; max feed force X 7 kN, Y 13 kN, Z 10 kN (all 100% ED) • Guideways: Roller linear guides on all linear axes • Measuring system: Direct, absolute, 0.001 mm resolution, magnetic (for Siemens) • Control: CELOS with Siemens 840D sl Operate, 21.5" ERGOline multi-touch • Tool changer/magazine: Automatic with double gripper (vertical); 30-position HSK-A 63 chain magazine • Coolant/swarf standard: Chip tray with integrated 500 L tank; standard swarf management via chip tray • Condition: Excellent; only 1,963 spindle hours (machine was used only for making of prototypes) Additional equipment • Production package (P-K0398): Chip conveyor with coolant tank, paper band filter, internal coolant through spindle (IKZ) 40 bar / 23 l/min, external coolant 4 bar / 40 l/min, door flushing • Tool interface (P-M0039): Tool taper adaptation for HSK-A63 (DIN 69893) • Swarf wash pistol (P-G0004): 2 bar / 40 l/min • Measuring probe (P-K0263): Heidenhain TS 649 infrared touch probe • Tool measuring system (P-K0405): Blum laser for vertical tool length and diameter measurement • Kinematics option (P-K0224): 3D quickSET toolkit for checking/correcting 4/5-axis configuration • Operation Mode 4 (P-H0038): Manual intervention in work area with open doors under controlled process • Electronic handwheel (P-H0109): Siemens 840D • Tooling included Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes