Three rolls bending machine 2000 x 13

FACCIN 3HEP 2021

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software Iisdpfx Agji Apfzo Isb 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM Iisdouddcaepfx Ag Ieb 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: new, Year of construction: 2023, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,050 mm, Technical specifications Cutting capacities: Maximum cutting length: 3100 mm Maximum thickness for mild steel: 10 mm Maximum permissible thickness for stainless steel: 6 mm Overhang: 50 mm Adjustable cutting angle: 1.5 degrees Number of hold-down devices: 16 Hold-down force: 22 tons Adjustable backgauge: up to 1000 mm Speed of the back gauge: 200 mm per second Drive and dimensions: Motor power: 22 kW Oil tank capacity: 200 liters Support arms: 2 pieces Worktable height: 865 mm Worktable width: 580 mm Worktable length: 3515 mm Machine dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm Weight: 9300 kg Total width incl. support arm and safety guard: 3600 mm Equipment features Design with pendulum cut for precise results Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length and number of pieces, including USB connection Motorized backgauge mounted on ball screws with a reach of up to 1000 mm, can be folded up for maximum flexibility Clear control panel on the swivel arm for convenient control Ijdpsrt Uv Esfx Ag Ijib Hydraulic hold-down device for optimized cutting results, positioned close to the cutting edge Foot pedal for easy operation Centrally adjustable cutting gap adjustment for different material thicknesses Cutting line lighting for increased precision Large support table with sliding balls for material handling Counter for number of cuts Options for single and series cutting Folding finger guard and side stops for safe working Easily replaceable and resharpenable blades for long-lasting sharpness Adjustable cutting length for efficient processing and minimum material consumption Low-maintenance design with easily accessible oil filling Safety light barriers at the rear of the machine for increased occupational safety Professional customer service Operating instructions in GERMAN and ENGLISH Complies with the current CE safety regulations

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Iisdsg Dgbhjpfx Ag Iob Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm Iisdpfovx Uvxjx Ag Ijb upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: good (used), Build in 2006 Iijdpfjgyzzusx Ag Ieb Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Further information: Iiodpfsx Sw Dqjx Ag Isb - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Isdpfxjxl R Hvj Ag Ioib Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t Ijdex Dtt Aopfx Ag Ieib The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Iedpfx Aevcbtreg Isib Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.