Double hemmer and circular saw

EWD DK 90 - 1000 / RET / KB / ASV

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Bodpfx Aajw Sy T Ho Eold Storage location: Nattheim

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) Bledpfx Aswclkyoa Eed - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page Blodpfxeiwaxns Aa Ejd the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Bsdpfx Aasgmdnfj Eeld

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Bljdpfocggy Ssx Aa Esd - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line Bledpfx Aaox Rn Uds Esd EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Complete hydraulics/control cabinets

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 4000 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 3.4 kW, 230 V Dimensions L × W × H (mm): 3100 x 2190 x 1650 Bljdpfx Aaeukq T He Esd Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Juice pump

Condition: new, Year of construction: 2025, functionality: fully functional, Industrial Band Saw – Power, Precision, and Reliability in Every Cut – HEAVY DUTY MACHINES Equipped with a powerful electric motor of 30, 37, 45, or 55 kW, this band saw delivers outstanding performance, allowing for cutting capacity of up to 35 m³ of logs per 8-hour shift. With a maximum log diameter of Ø1150 mm, it easily handles even the most demanding timber. Key Advantages: • High Precision – Perfectly straight cuts with minimal deviations. • Power and Efficiency – High motor output ensures fast and efficient cutting. Bljdpjwfqqdofx Aa Eed • Robust Construction – Built to withstand the toughest working conditions. • Easy Operation – Intuitive control system for quick adjustment of all parameters. • Safety Systems – Integrated safety mechanisms for secure operation. Whether you're in the wood industry, a sawmill, or a large-scale workshop, this saw is the ideal solution for high-productivity and precise cutting of large logs. High degree of automation with Siemens / Scheider PLC and Wravor FastSmartCut program, always with option with manual control.

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min Blodev Raqxepfx Aa Ejd 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm Bledpfx Aaswa Dx Ro Eod distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation