Unit + Cylinder 200/30mm

Engel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Bledpfxoy T Hx Hs Aqrjh Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Bljdpfx Ajug Edkjqrjh Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h Bjdpfxoy T Hfys Aqrolh EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Distance between tie bars H: 1030 mm Shot volume: 705 cm3 Type: Horizontal Drive: Hydraulic Core pullers 2+2 Bodpezbdcwefx Aqrslh Robot Viper 40

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Bjdpjfnqapofx Aqrslh

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 60 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 705 cm3 Blsdpozbdb Hofx Aqrjh Type: Horizontal Drive: Hydraulic Hydraulic cores 2 + 2 \+ 6 AXIS robot arm (KUKA)

Condition: excellent (used), Year of construction: 2014, 🔧 *M001 — ENGEL DUO 1800 / 700* (2014) 📐 *CLAMPING UNIT* • Clamping force: 700 T • Coining: NO • Max mold weight: x kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: NO 🔌 *MOLD INTERFACE* • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 8+8 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 💉 *INJECTION UNIT* • Screw diameter: 60 mm • Nozzle face + thread: R20+UNF 7/8" Blodpfx Aqozbdbteroh • Injection unit type: 1800 • Screw stroke: 270 mm • Max injection capacity: 763.41 cm³ • Max injection pressure: 2360 Bar • Max injection rate: 710 cm³/s • Accumulator SW / HW: YES / YES ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 4 • Sockets 400V/32A: 7 • Sockets 400V/63A: 1 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 4 • Air pressure ports: 6 • User inputs / outputs: 18 / 8

Condition: excellent (used), Year of construction: 2014, For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Bljdpfx Aqeiw Dt Djreh

Condition: good (used), Year of construction: 2009, ENGEL EM 440/100T Bljdpfxjyktp Se Aqrjh Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 650 t Bodpfoza Au Nsx Aqrslh Screw diameter: 80 mm Distance between tie bars V: 1440 mm Distance between tie bars H: 1510 mm Opening min max: 450-950 Shot volume: 1810 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), Krauss-Maffei Injection unit 220 (complete) with electrical screw drive. Screw diameter 40 mm Bjdofwcrnepfx Aqrslh

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! * Blodpfxjwftr Dj Aqrsh

Condition: excellent (used), Year of construction: 2018, ENGEL duo 8160H/860W/1700 combi Machine type: ENGEL duo 8160H/860W/1700 combi Year: 2018 Machine version: 2-component machine Injection unit arrangement: H/W arrangement, one above the other, distance 300 mm Clamping force: 17,000 kN Min./max. mould height: 800 / 1,600 mm Max. opening stroke: 2,550 mm Max. platen distance: 3,350 mm Rotary table diameter: 2,250 mm Mould weight: DS: 30,000 kg AS with rotary table: 21,590 kg Total: 36,586 kg AS without rotary table: 25,790 kg Rotary table weight: 4,200 kg Injection unit 1 / 3660H Nozzle: hydraulic shut-off nozzle Nozzle radius: R35 Nozzle bore: Ø8 mm Screw diameter: 105 mm Max. stroke volume: 4,070 cm³ Max. shot weight PC-ABS: 4,600 g Max. shot weight PP: 3,700 g Max. shot weight PA6 GF30: 5,500 g Max. shot weight TPU: 4,960 g Injection unit 2 / 500W Nozzle: open nozzle Nozzle radius: R35 Nozzle bore: Ø4 mm Screw diameter: 50 mm Max. stroke volume: 432 cm³ Max. shot weight TPV 55 Shore: 390 g Max. shot weight EPDM 65 Shore: 483 g Tie bars / platens Tie-bar spacing horizontal: 1,850 mm Tie-bar spacing vertical: 1,415 mm Tie-bar diameter: 265 mm Centring rings Nozzle side: 1K Ø250 mm / 2K Ø200 mm, pitch 300 mm Ejector side: Ø250 mm Centring groove DS: 300 mm below nozzle centre, 100 × 32H8, depth 18 mm Ejector Max. ejector stroke: 300 mm Central ejector: without Thread: M20 Ejector rod diameter: Ø50 mm Limit monitoring connector: 4-pin Core pullers AS: 4× + 1× proportional valve DS: 4× + 1× proportional valve Core in: SKM13IR3 / alternative SKM10IR2 Bjdpfx Aozatkhoqrolh Core out: SKS13IR3 / alternative SKS10IR2 Limit monitoring connector: 16-pin according to Euromap 13 Valve gate control Hydraulic: 16-fold / SKM10IR2 / SKS10IR2 Pneumatic valves Ejector side: 1× blow function Nozzle side: 1× blow function Mould temperature control Ejector side: 16 circuits Nozzle side: 16 circuits Machine-side water connection: Hasco N9 Tool-side water connection: USA system DME N9 / alternative N6 Mould heating 64 control zones 8 plugs for sensors and heating 16-pin Robot / handling Robot: ENGEL viper 60-RC 300 Travel Z: 3,320 mm Travel X: 1,500 mm Travel Y: 2,600 mm C-axis: 210 Nm B-axis: 210 Nm Automation Conveyor belt for parts deposit Belt width: 1,600 mm Light barrier Special features iQ weight control Gas-assisted processing / blowing agent processing Injection compression moulding Cavity pressure sensors MuCell prepared, not yet installed Electrical data Main connection A: 3×400V + N + PE / 50 Hz Nominal current A: 0 A Rating A: 250 kW Main fuse A: 630 A Short circuit current rating: 10,000 A Control voltage: 230V AC / 24V DC Main connection B: Nominal current B: 210 A Rating B: 150 kW Main fuse B: 250 A

Condition: reconditioned (used), Complete pump set for Demag ET 330 Blodpfxefwctpo Aqrsh

Condition: excellent (used), Year of construction: 2019, Clamping force: 650 t Screw diameter: 60 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 890 cm3 Bsdpfx Aszaqygeqrslh Type: Horizontal Drive: Hydraulic