CNC turning and milling center
EMCO MAXXTURN 65-G2 SMY

Name: EMCO MAXXTURN 65-G2 SMY
Brand: EMCO
Availability: InStock

Year of construction

2022

Condition

Used (fully functional)

Location

Jakling

CNC turning and milling center EMCO MAXXTURN 65-G2 SMY

Machine data

Machine type:: CNC turning and milling center

Manufacturer:: EMCO

Model:: MAXXTURN 65-G2 SMY

Year of construction:: 2022

Condition:: like new (used)

Functionality:: fully functional

Operating hours:: 1,150 h

Price & Location

Location:: Jakling 164, 9433 St. Andrä, Österreich

Call

Technical details

Turning length:: 610 mm

Turning diameter over cross slide:: 500 mm

Turning diameter:: 725 mm

Spindle speed (max.):: 5,000 rpm

Spindle bore:: 65 mm

Travel distance X-axis:: 260 mm

Travel distance Y-axis:: 80 mm

Travel distance Z-axis:: 610 mm

Rapid traverse X-axis:: 30 m/min

Rapid traverse Y-axis:: 15 m/min

Rapid traverse Z-axis:: 30 m/min

Feed length X-axis:: 260 mm

Feed length Y-axis:: 80 mm

Feed length Z-axis:: 610 mm

Torque:: 250 Nm

Bar passage:: 65 mm

Equipment:: documentation/manual, rotational speed infinitely variable

Details about the offer

Listing ID:: A20733282

Update:: 07.07.2026

Description

For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control!

CNC turning center for complete machining of turned and milled parts.

Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle.

State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming.

Main spindle:
- Max. bar capacity: 65 mm
- Max. torque: 250 Nm
- Speed range: 0–5000 rpm

Sub-spindle:
- Drive power: 22 kW
- Max. torque: 130 Nm
- Speed range: 0–7000 rpm

Turret:
- 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders
- Max. drive power: 6.7 kW
- Max. torque: 25 Nm
- Max. speed: 5000 rpm

Y-axis travel: +/- 40 mm

Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle.

Hydraulic unit, interface for chip conveyor, documentation and CE certificate.

Control language: German/English

Electronic handwheel

EMCO tool breakage and wear monitoring/SINUMERIK ONE

Alternating spindle speed

Sub-spindle as tailstock:
This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force.
Dcjdpfx Aex E Dncec Hoi

EMCO PROFI-NET ROBOT INTERFACE:
Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free.

Digitalization package for Sinumerik:
Condition monitoring

SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information:
- Machine ON - AUX ON
- Automatic operation
- Production mode - active program
- Program running and override between 95 and 105%
- Part count impulse (M30)
- Programmable impulse (M300)

3D machine data/MT65-G2: 3D data model of the machine included.

Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional).
- Max. finished part length: 175 mm
- Max. finished part diameter: 65 mm
- Max. finished part weight: 4.5 kg

INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader.

Further options available…

Machine is available immediately!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2012

9 listings online

Call

Send inquiry

Telephone & Fax

+43 4358 ... show

Fax:

These listings may also fit your interest.

Listing

Machining Center - Universal GROB-WERKE G 550 5-axis &U-Axis

Ispringen

18,634 km

Machining Center - Universal
GROB-WERKEG 550 5-axis &U-Axis

Call

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. Djdpfeyzza Iex Ac Heci twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

See details

Listing

Machining Center - Vertical STAMA MC 010

Metzingen

18,619 km

Machining Center - Vertical
STAMAMC 010

Call

Listing

Metzingen

18,619 km

Deephole Boring Machine
SIGB 30 /16

Call

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Dsdpfxjt Hwucj Ac Hoci Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

See details

Listing

DMG MORI DMU 65 monoBLOCK DMG MORI DMU 65 monoBLOCK

Czech Republic

18,654 km

DMG MORI DMU 65 monoBLOCK
DMG MORIDMU 65 monoBLOCK

Call

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,963 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D sl Operate, overall weight: 11,800 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 5, This 5-axis DMG MORI DMU 65 monoBLOCK was manufactured in 2016. It features an impressive X-axis travel of 735 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful spindle speed of 15,000 rpm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Spindle: power 21 kW (40% ED) / 16 kW (100% ED); torque 111 Nm (40% ED); pull stud DIN 69872 • Table: Rotary table (C-axis) Ø650 mm integrated in rigid table 800 x 650 mm • Swivel/rotary axes: A-axis +120° / -120° from 0°; C-axis 360°; A-axis torque/holding 3,400 Nm (100% ED); A-axis hydraulic clamping holding torque 6,200 Nm; C-axis torque/holding 2,000 Nm (100% ED) • Feed/rapid: Rapid traverse X/Y/Z 40 m/min; max feed X/Y/Z 40,000 mm/min; max feed force X 7 kN, Y 13 kN, Z 10 kN (all 100% ED) • Guideways: Roller linear guides on all linear axes • Measuring system: Direct, absolute, 0.001 mm resolution, magnetic (for Siemens) • Control: CELOS with Siemens 840D sl Operate, 21.5" ERGOline multi-touch • Tool changer/magazine: Automatic with double gripper (vertical); 30-position HSK-A 63 chain magazine • Coolant/swarf standard: Chip tray with integrated 500 L tank; standard swarf management via chip tray • Condition: Excellent; only 1,963 spindle hours (machine was used only for making of prototypes) Additional equipment Dsdozd T Sfjpfx Ac Heci • Production package (P-K0398): Chip conveyor with coolant tank, paper band filter, internal coolant through spindle (IKZ) 40 bar / 23 l/min, external coolant 4 bar / 40 l/min, door flushing • Tool interface (P-M0039): Tool taper adaptation for HSK-A63 (DIN 69893) • Swarf wash pistol (P-G0004): 2 bar / 40 l/min • Measuring probe (P-K0263): Heidenhain TS 649 infrared touch probe • Tool measuring system (P-K0405): Blum laser for vertical tool length and diameter measurement • Kinematics option (P-K0224): 3D quickSET toolkit for checking/correcting 4/5-axis configuration • Operation Mode 4 (P-H0038): Manual intervention in work area with open doors under controlled process • Electronic handwheel (P-H0109): Siemens 840D • Tooling included Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

See details

Listing

Steißlingen

18,686 km

Welding robot
KUKAKR C4 compact

Call

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Dcodpfx Asxw R Nnsc Hei

See details

Listing

Bed milling machine STYLE CNC Machines BT 4000 (XYZ:4000x1000x1000 mm)

Bunschoten-Spakenburg

18,546 km

Bed milling machine
STYLE CNC MachinesBT 4000 (XYZ:4000x1000x1000 mm)

€249,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection Dcjdpjw Ty S Ssfx Ac Hji - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

See details

Listing

Vertical machining center **USED HAAS** VF2 TR 5 axis Vertical Machining Centre

Erith

18,791 km

Vertical machining center
**USED HAAS** VF2TR 5 axis Vertical Machining Centre

Call

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Dcedpfxoykqtze Ac Hsi Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

See details

Listing

Birmingham

18,725 km

Folder
RAS62.25

Call

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Dodpfxon Tnzfo Ac Hoci Complete with segmented and straight tools

See details

Listing

Weidenthal

18,398 km

Vertical machining center
HurcoVMX 42

€14,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Dcsdpfx Acjwtdzrs Hsi Tool holder SK 40 Internal coolant 35 kVA approx. 7550 kg Comprehensive tool package available separately

See details

Listing

Linz

18,298 km

CNC-Turning-Boring-Milling Centre
WFL Millturn Technologies GmbH & Co. KGM60-G MILLTURN 2000mm

Call

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 Dcodpfx Aju Hl R Tjc Hsi swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

See details

Advertise here