Lead/traction spindle lathe

EMCO emcoMAT-17D

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Godpfxodctnbs Afiobu Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Gbedpfxsxc H Dfo Afiju Infinitely variable speed adjustment between gear ranges. Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: Gedpfju N Dpmox Afiebu - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm Gbsdpfxswvuf Te Afieu >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Gedpev Iqm Sofx Afijbu Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, center height: 170 mm, total length: 1,650 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 755 kg, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, New machine immediately available from our warehouse in Stuttgart. ( subject to prior sale) Whether prototype construction, maintenance or very important the training - the conventional and cycle-controlled machines of EMCO create here the balancing act and offer highest accuracy on smallest space and flexibility up to the detail. From possible accessories to the organization of the insertion, we are at your side with advice. Highlights of the EMCOMAT 17D - Main spindle DIN55029 - Tailstock (off-center adjustable) - Single steel holder (clamping claw) - Belt drive for feed gear - Chuck protection with electric limit switch - Optional equipment such as coolant device, sliding chip guard doors, etc. Working range: - Travel in X/Y/Z: 220 / - / 710 mm - center distance: 700 mm - Center height: 170 mm Main spindle: - Max. Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029) - Max. Drive power: 5.3 kW Tailstock: - Internal cone: MK3 - quill stroke: 120 mm - inner taper of the quill: 50 mm Gbjdpedq Rb Asfx Afisu The machine can be inspected in Stuttgart.