Coordinate radial drilling machine

Electric Servo m12H

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Ffodpfxex Hr Duo Aa Eow

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Fsdpfoiwkhksx Aa Esfw

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Ffjdpfx Aaefz U S Eo Ejw Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Ffodpfxjwd Ulvj Aa Esw

Condition: excellent (used), Year of construction: 2017, operating hours: 11,920 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 66 kVA, torque: 118 Nm, controller manufacturer: HURCO, total height: 3,160 mm, total length: 2,200 mm, total width: 3,170 mm, table width: 1,270 mm, table length: 610 mm, table load: 1,360 kg, rotary table diameter: 600 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,034 h, spindle motor power: 36,500 W, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are selling a lightly used HURCO VMX 42 SRTi. Main spindle operating hours: 2,034 h The machine has been in production since early 2018. It can be inspected at any time, as it is still in daily use. Approx. 95% of machining has been on aluminum Fsdpfx Ajyi T Ulja Esfw Integrated oil mist extraction system Renishaw probe for calibration 5-axis simultaneous machining Extensive accessories included: Tools, holders, fixtures, a storage cabinet, workshop trolley, and chip cart with a total value of approx. €50,000 net. A detailed list is available. There is also the possibility for the buyer to manufacture and supply parts for the seller in the future. The corresponding machining programs are already available.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Ffsdev Dvllepfx Aa Eow Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Fedpfxsxc N Rho Aa Eefw Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: excellent (used), Year of construction: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of production: 2019 Ffodpfot Rwwrjx Aa Eow Axes: 6 Reach: 1441 mm Load: 12 kg Fanuc System R-30iB Plus robot controller and 2 m x 2 m x 2.7 m housing (without Kemper extraction system)

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Ffjdpfx Aajglaq Is Ejw Total weight of all rollers: 57 kg Good condition

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V shaft diameter: 100 mm total power requirement: ca. 15,1 kW weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm Ffedewh Rq Njpfx Aa Eew - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *