Gear hobbing machine

Eifco

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Lhjdpep T Uz Ejfx Adkjp Optional: We can deliver the robot with an ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in the robot controller, motor, cable chain, grease pump – fully functional and running. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Ljdpfx Adjlaugaokshp Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Turning diam. : 580 mm Turning length : 3250 mm Mainspindle: Technology:Belt-driven spindle with Gearbox Speed:1.000 rpm Power (max.):45 kW Torque (max.):4.008 Nm Lhsdpfjwt Iwqjx Adkop Barcapacity:205 mm Workpiececlamping I:3-Jaw chuck, Autogrip AP-230 ø535 mm Workpiececlamping II:Manual 3-Jaw chuck, Chandox SK20 (Rearside Spindlehead) Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 75 Tooldrive:3.000 rpm, 7 kW, 83 Nm Movement in X/Y/Z:340/160/3.250 mm Rapid travers in X/Y/Z:20/7/12 m/min Tailstock: Technology:Towed tailstock with programmable Sleeve Stroke:150 mm Cone:MK5 Equipment/Accessory: Chipmanagement:Chipconveyor Coolingmanagement:Coolant pump Toolmeasurement:Measuringarm, Renishaw RP3 Oilmistseparation:Mechanical extraction, AR Filtrazioni ARNO 3VF YF Shaftprocessing:Manual Steady rest, ø150-300 mm Toolholder:Misc. static and driven toolholder Setup operations:Electronic Handwheel Further Equipment:Automatic Door (pneumatic), Trafo, Oilskimmer Further Accessory:Misc. Jaws and EWS Quickchangeinserts

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Lodpfx Aet Hw R Dsdkohp Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2025, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm Ledpfx Adsqqi Dkekehp High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine * Lhedjizlh Hspfx Adkep

Condition: excellent (used), Year of construction: 2020, operating hours: 1,139 h, functionality: fully functional, turning length: 599 mm, turning diameter: 530 mm, spindle motor power: 11,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 56 mm, travel distance X-axis: 530 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 599 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Double magazine: Revolver turret + Internal magazine with additional 12 CAPTO tools protected in internal magazine + 12 mounted in turret + 6 25 mm square hybrid attachments (see attached technical sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Hand piece collector and finished piece exit carpet, Work lamp, Lhedpfx Ajvv Tvfedkop ----- Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Double magazine: Revolver turret + Internal magazine with an additional 12 CAPTO tools protected in the internal magazine + 12 mounted in the turret + 6 25 mm square hybrid attachments (see attached technical data sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Piece collecting hand and finished piece exit carpet, Work lamp,

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope Lhjdpfx Ajq U Sa Sedksp - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min Lodpfjw T Sh Eex Adkjhp (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW Lsdpfx Aovzhg Njdkjhp weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.