Edge sanding machine

ECOLINE RUSTIMAT 2-600

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump Podpfxoukcy Es Amksgl (this machine had been in operation for 10 years in a woodworking school)

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 Pgedpfx Amox Enpqekjl - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Pjdpfx Asyzyrvsmkogl Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, Year of construction: 2018, total length: 3,000 mm, total width: 2,070 mm, total height: 1,670 mm, Empty weight: 4.000 kg Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: P0220118 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 200 - Number of cylinders [pcs]: 6 - Total working pressure [ton]: 90 - Working pressure [kg/cm²]: 3 - Transport dimensions: 3000mm x 2070mm x 1670mm (l x w x h) - Transport weight [kg]: 4000kg Psdpfswniqzjx Amkogl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Colour: Grey Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 Pjdpfx Aewf Hw Homkegl - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Pgjdpfx Amsyz Stlokol Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, machine/vehicle number: 088566, SECOND-HAND CUTTING SAW CURSAL MOD. TRV 2200 - DIAM. 500 - CE RULES - RALM infeed motorized rollers mm. 3000x450 - PSR2C rollers table with loader mm. 3000x200 Pgjdper Ndalsfx Amkjl - TSEP outfeed belt with controlled ejectors - S/n 088566 - Year 2008

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Pgedpfxjdzp T Ds Amksl Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: ready for operation (used), Year of construction: 2019, laser power: 8,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 130 mm, overall weight: 14,000 kg, total height: 2,250 mm, product length (max.): 10,500 mm, number of axes: 3, This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information. • Laser source: IPG • Maximum sheet size: 3000 × 1500 mm • Positioning speed (X–Y): 140 m/min • Positioning accuracy: ±0.050 mm/m • Repeatability: ±0.025 mm • Maximum sheet weight: 900 kg • Electrical consumption: 28.1 kW/h • Compressed air consumption: 30 Nm³/h • Cutting gases: Oxygen (O₂) / Nitrogen (N₂) • Gas pressure: min. 12 bar – max. 32 bar • Ground resistance: < 10 Ohm Additional equipment Psdpfxex S Sklo Amkjgl • Interface for third-party automation system LM4400 • Automatic nozzle changer LM5130 • Automation cleaning unit LM5600

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Pgedpjytgn Tjfx Amksl