DURMA - 3 rolls

Durma Rundbiegemaschine HRB 3V by Durma

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Isdpfod H Rf Tox Ahvetd Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Iedpfx Aov Ibkbohvetd Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min Itsdogw Dqpepfx Ahvod 9 bar operating pressure KW 30

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm Itedpfxjuddgls Ahved track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Isdpoftdh Ijfx Ahvstd Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Itjdpfx Asvxbm Rshvsd Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord. Iedpfx Aotp Dhpshvotd  Year of build: 2013.

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Iodpfx Ajh I Edvohvetd

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control Itedpfxjk Adl He Ahvjd diameter from 180mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Iodpjuf Nr Aofx Ahvetd Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!