DURMA Blue Bend

Durma | Direkt vom Hersteller PB4

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Fgedpfxsqzibto Ab Tsk Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor - With 4 roller sets - Emergency stop - 400V Fedpfxjgg Nq He Ab Tjgk

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m Fsdpoh Ayyqofx Ab Tjgk technical inforamtion under subjet of correction

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Fgsdpfx Absww Iu Rj Tsk

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Fsdpfxsrwxkhs Ab Togk Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: ready for operation (used), Year of construction: 2014, Bystronic Bytrans Extended 3015 Fgedpfx Aov Ra T Tsb Tsk

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Fedpfexfiw Tex Ab Togk Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. Fjdpjr Ak Exjfx Ab Tjgk All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: new, NEW OKIO-M5 sanding robot Random orbital sander and force sensor Axes: 6 Load capacity: 5 kg Reach: 922 mm Fjdjtr T R Aspfx Ab Tjgk

Condition: new, sheet length: 2530sheet thickness: 6prebending: 5total power requirements: 5,5weight approx.: 3750messurements (LxWxH): 4250 x 1.200 x 1.250 Fgsdpfx Aod Ab E Ueb Tek