Rotary Welding Table

Dumeta D-HB-3

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0 - 90 Grad turning speeds 0,25 - 4,0 U/min 360 Nm welding current 500 Ampere total power requirement 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. Hedpfxsfv Axqs Ah Nsfb • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Hedpsiu Acpjfx Ah Nefb

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head Hfodpfx Aheg Eglpj Njb By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Hfjdpjfh R N Defx Ah Nob Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Hodpfx Ahog Tdpge Nofb Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one Hsdpfx Ajfg E Hpsh Nsfb high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm Hjdpfx Ajvgc R Hsh Njfb automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Load 2000 KG Manual remote control with digital display Hjdpfoncfvhjx Ah Nefb Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m Hfsdpfofg E Hlox Ah Nob ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required Hfodpfx Ahsi Emaps Njb → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021