CNC turning and milling center

DOOSAN MX20000ST

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 TOOL PRESETS N. 2 SELF-CENTERING N. 7 HSK TOOLS Ibodpfx Abewayv Esnja

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition. Ibjdpfx Abswzmpzjnsa

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions Ibjdpeviq U Ejfx Abnea

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Iodpfjh Nypfsx Abnjba

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo. Ibsdpsyucd Hofx Abnea

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Iodpsydmuuofx Abnsba Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm Ibsdpfoym T Itex Abnea • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A • Max ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

Condition: used, Year of construction: 2024, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 6LUE00127, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 1,000 kg, total height: 3,600 mm, total length: 3,780 mm, total width: 2,420 mm, table load: 1,000 kg, rotary table diameter: 800 mm, overall weight: 21,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, coolant supply: 42 bar, distance table center to spindle nose: 100 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 120 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Maximum stability with 21,000 kg mass High speed thanks to torque drives in the A/C axes 5-axis simultaneous machining Demonstration machine at used machine price Equipment: - Heidenhain TNC 640 Ijdpfx Ajzddzljbnjba - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production package I with 42 bar CTS (coolant through spindle) - Air through spindle - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum - Paper band filter system - Spindle ring flushing system - 64 tool magazine slots - SK40 - Scraper belt chip conveyor with pre-filtration - Chip flushing - Extraction system

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light Ibedpsyrr Rwjfx Abnja • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Ijdpfezf Admox Abnsba Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear