Vertical Machining Centre

DOOSAN DNM 750 II

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Nkodpfjqzhfxox Ad Nst Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. Nksdpshzbipsfx Ad Nst - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2015, operating hours: 1,603 h, functionality: fully functional, machine/vehicle number: MV0062-000372, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, type of input current: AC, overall weight: 15,000 kg, Equipment: USB port, Doosan DNM 750 II – CNC Machining Center – Excellent Condition – Available in 2 Weeks The machine is currently running in daily production, accumulating hours, and can be demonstrated live during inspection. It has been professionally maintained and shows no mechanical or electronic issues. Machine Condition Nedpfjx Ar Dqox Ad Nekt - Fully functional, operates flawlessly - Clean and well-maintained - No vibrations, spindle issues, or alarm errors - Ready for immediate demonstration - Delivery possible in approx. 2 weeks Important Notes - Sold without accessories (no tool holders or workholding included) - All documents and technical information available on request - Ideal for machining steel, aluminum, and engineering plastics Additional Information - The machine can be inspected under power - Cutting test available on request - Loading and transport can be arranged at buyer’s cost

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm Nkedsx Dndcepfx Ad Net

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min Nksdpfxju Uu S Tj Ad Net feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Nodpfxjx R R Hce Ad Nekt Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Nodjwm Rqaspfx Ad Nekt Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Nedpex Ih Dgofx Ad Njkt

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 Nksdpfx Adox Hhctj Nst - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Nedpfx Adsxur Sxe Nekt Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800