DMG DMU 50

DMG DMU 50

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 30, DMG MORI DMU 50, 3rd Generation 5-Axis Universal Machining Center Manufacturer: DMG MORI Model: DMU 50, 3rd Generation Year of Manufacture: 2018 Control System: Siemens 840D sl Operate with CELOS Operating Panel: 21.5-inch ERGOline Multi-Touch Technical Data Machining: 5-axis simultaneous machining NC rotary table Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Swivel/Rotary Axes: B-axis: -35° to +110° C-axis: 360° Worktable: Clamping area: Ø 630 × 500 mm Maximum table load: 300 kg Main Spindle: speedMASTER motor spindle Spindle speed: 20–15,000 rpm Tool interface: SK40 Spindle power: 21 kW (40% duty cycle) Continuous power: 16 kW (100% duty cycle) Tool Changer: Tool magazine: 30 positions Tool interface: SK40 Feed Rate: Rapid traverse X/Y/Z: 42 m/min Special Equipment Internal coolant supply (IKZ) with 40 bar Coolant system with 600 liter tank Paper band filter system including cabin roof Chip conveyor with scraper chain Double-stage filter, 25 µm, manually switchable Blow-off air through spindle center, selectable via M-function Renishaw PP60 optical infrared workpiece measuring probe (OMP60) Heidenhain TT160 tool measurement Tool length and diameter measurement Tool breakage detection 3D quickSET for checking and correcting machine kinematics ATC – Application Tuning Cycle Electronic handwheel Tsdpfxs Agnyks Apdjd Flushing gun for chip removal Total spindle hours: approx. 18,600 New spindle replaced in 2021 at approx. 5,800 hours

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -35° / +110° Todpfx Aez Du Dyspdjd • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 42,253 hours (under power) / 21,241 hours (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 12,000 h, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: 2017 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter - 600 l tank - Cabin roof - Rotary union through spindle center - Air blast through spindle center - Wash-down gun - Mechanical oil and emulsion mist separator - Infrared touch probe, Heidenhain TS 649 (if present) - 3D quickSET preparation - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage detection TRS2 (if present) - Tracy Cylindrical surface interpolation - Lang RoboTrex 52 automation system Tods Agr I Sjpfx Apdjd Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is stated in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union Tjdpfxe Agr I Do Apdjd - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Tedjzn Iucspfx Apdod Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Todpfo Admbwox Apdjd Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor

Condition: excellent (used), Year of construction: 1998, Control system: Heidenhain TNC 124 Travel ranges X/Y/Z: 500 x 400 x 400 mm Todo Aa D Dhspfx Apded Spindle speed: 4,500 rpm Tool holder: SK 40 Manual rotary table with tilting axis: 700 x 500 mm

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm Tjdpfx Aoyyrh Hepded MAX TURNING DIAMETER: 2800 mm SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min TOOL MAGAZINE: BASKET-TYPE ; TYPE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; AUTOMATIC DOOR ; HEAD COOLING SYSTEM ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO Tedpfx Aozhxi Dspdod spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Todpsz An S Rjfx Apdod Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Tedpfx Apjyxg Hbedsd Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice Teds Aaz Nnepfx Apdjd IoT Connector Service Agent (Celeos) Messenger (Celos)

Condition: excellent (used), Year of construction: 2005, SIEMENS 840D control with B + C axis Working travels 500 x 450 x 400 mm Table swivelling +110°/-5° Table rotating 360° Todpfxeuy R Sij Apdod Spindle taper SK40 Spindle speeds -9'000 rpm tool changer 16 pos. 3D measuring tracer Laser tool setting system Zero point clamping system UNILOCK Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Todpfx Apowbginjded Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm Tsdpfszyu Umjx Apdjd tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table