Machining Center - Horizontal

DMG MORI NHX 5000

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: Nsdpfx Adexnkdmj Nscl - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: used, Year of construction: 2015, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2015 Control : Hurco MAX5 Speed : 10000 rpm Movement X/Y/Z : 762/508/610 mm Tool holder : SK 40 In General: Year of manufacture:2015 Control system:Hurco MAX5 Travel X/Y/Z:762/508/610 Speed:10,000 rpm Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK 40 Work table: Clamping surface:1,020 x 510 mm Maximum table load:1,300 kg : Tool magazin: Technology:Drum magazine Nsdpfx Ajxz I A Hod Necl Tool changer:Double gripper Number of stations:24 Max. tool diameter:81 (120) mm Max. tool length:300 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system NC rotary table:4th axis (A-axis) Tool magazine:30 stations Tool measurement:Renishaw measuring probe

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Cylindrical grinding machine – external / Manufacturer: WMW / Type: SA 6U x 3000 / YOM/Completely overhauled: 2013 (machine overhauler/carried out by SerWeMa/Germany) Range of parts: Straightening rollers, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. The machine can be inspected under power by appointment. TECHNICAL DATA: Working range: - Centre height: 260 mm - Max. swing diameter: 515 mm - Max. grinding length: 3.000 mm - Max. grinding diameter: 515 mm - Max. workpiece weight: 500 kg Workpiece headstock: - Speed continuously variable: 12.5 - 355 rpm Ncjdpfjxymdasx Ad Nol - Centring tip: Morse K5 Tailstock: - Max. quill stroke: 40 mm - Centring tip: Morse K5 Grinding headstock: - Grinding wheel: * Max. outer diameter: 630 mm * Width max.: 125 mm EQUIPMENT: - Extraction system - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Njdpfx Adoxfg Ayo Nscl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets Ncsdpfxow Awmts Ad Nel 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the Nedoul Efmspfx Ad Necl sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. Ncodjtximvjpfx Ad Nsl - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Ncodpfxjtqtk As Ad Nol Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height 250mm Maximum 730mm Ncedpfx Adspdrpzj Nel

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Nsdeia Rtdspfx Ad Nscl Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *