Vertical machining center

DMG MORI CMX 1100 V

Condition: ready for operation (used), Year of construction: 2018, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1100 mm Y-AXIS TRAVEL: 560 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 120-630 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 20 - 12000 rpm; 9 - 13 kW; ISO 40 - DIN Ncodpfx Acjwh Dg Rebjt TABLE SIZE: 1400 x 560 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 12 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 5830 Kg OVERALL DIMENSIONS: 4028 x 2750 x 2950 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH No 30 TOOLS-HOLDERS ISO 40

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Ncedpfx Asyuy D Rscbot Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: used, Year of construction: 2017, operating hours: 60,300 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table width: 560 mm, table length: 1,400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 5,830 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 32,000 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG MORI CMX 1100 V / 2017 / HEIDENHAIN TNC 620 / spindle replaced by DMG For sale: a used DMG MORI CMX 1100 V vertical machining center, manufactured in 2017. The machine is located at our facility in Bydgoszcz, Poland. The planned production run on this machine has just been completed, and the machine is ready for sale. The machine is still connected to power, so it is possible to start it up, inspect it, and view it on-site after arranging an appointment in advance. The main spindle was replaced by DMG service in November 2024. Since the replacement, the spindle has operated for approximately 3,700 hours. A DMG service report confirming the spindle replacement is available. Nedey I A Dujpfx Acboct Key specifications: Manufacturer: DMG MORI Model: CMX 1100 V Year of manufacture: 2017 Control: HEIDENHAIN TNC 620 3D Travel in X/Y/Z: 1100 / 560 / 510 mm Table: 1400 × 560 mm Spindle speed: 20–12,000 rpm Spindle taper: SK40 DIN 69871 Tool magazine: 30 positions Linear scales in X/Y/Z axes Wireless HEIDENHAIN measuring probe Chip conveyor Electronic handwheel Coolant tank: 250 l Machine weight: approx. 5830 kg Operating hours: Approximately 3,700 hours since spindle replacement Spindle hours according to the counter: approx. 33,000 hours Machine on-time hours: approx. 61,800 hours Current meter readings are available in the documentation dated May 12, 2026.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 Njdpfx Aoylkl Tjcbsct • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: good, fully functional Location: Austria (Graz) Inspection: on-site or via video call by arrangement Pictures/Video: Additional pictures and videos of the machine in operation will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret according to DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: stepless Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): longitudinal: 0.001–50 mm/rev (Note: additionally stated 0–20 mm/rev) lateral: 0.001–50 mm/rev Ncodpfsvphv Tjx Acbst Feed force: longitudinal: 6,000 N lateral: 3,000 N Max. rapid traverse speed longitudinal/lateral: 8 / 4 m/min (Note: additionally stated 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection.

Year of construction: 2019, condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Ncodpeuk I Eyefx Acbjt

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Ncedetwliwjpfx Acbjt Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Nodpfsv Tk Exox Acboct Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: used, Year of construction: 2021, operating hours: 28,000 h, functionality: fully functional, workpiece weight (max.): 80 kg, grinding wheel diameter: 508 mm, workpiece weight between centers: 80,000 g, distance between centers: 800 mm, grinding wheel width: 80 mm, spindle speed (max.): 1,000 rpm, feed length X-axis: 370 mm, feed length Z-axis: 800 mm, feed rate X-axis: 15,000 m/min, feed rate Z-axis: 7,500 m/min, overall weight: 7,250 kg, input frequency: 50 Hz, input voltage: 400 V, We are offering a used STUDER favorit_1044 cylindrical grinding machine, manufactured in 2021. Ncsdpfx Aceylld Djbet Type: favorit_1044 Serial No: 1044- Year of manufacture: 2021 Voltage: 400 V Frequency: 50 Hz Weight: 7,250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Ncedpfx Acoul Svlsbot The machine is fully refurbished and tested.