Milling machine

DECKEL FP2

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Ijdjz Nx Axopfx Ahysbc Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Iedod Nmx Topfx Ahyebc Power: 2 x 0.55 kW

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Ibjdpfeumclasx Ahyjc

Condition: good (used), functionality: fully functional, Internal article number: 26092 Iedpfxsz Ha Eue Ahysbc Original Deckel high-speed milling head SK40 Compatible with Deckel FP1 / FP2 Well-maintained original condition! This high-speed milling head comes from an educational institution and is in good condition.

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Ibedpoxmd Uvofx Ahyjc Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request! Ibedpfegyw S Tsx Ahyjc

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. Ibsdpfou Nc Twjx Ahyjc *

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Iedpfx Ajxmd S Ijhyebc Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Ibjdpfjilg H Esx Ahyjc Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometrical overhaul in 2026 Technical data: Ibedozcdarjpfx Ahyjc Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 min-1 Feed rates: (18) 8 - 400 mm/min Head swiveling: 180° Equipment: - Geometry report - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Ijdpezavyfefx Ahysbc

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : Iedju I Rm Nepfx Ahyebc We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier Ibodexghtvspfx Ahyec >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm Iodpomhm Aqofx Ahyebc 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Ibodpoylawxefx Ahyec