Tool room milling machine

DECKEL FP2

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Ledpfxsxcbl Ds Aftehi Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Lhjdpfoym An Ajx Aftoi Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm Lodpfx Afoygia Estohi vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Lsdpjygicaefx Aftehi Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Lhsdpfx Afox Srp Uetoi

Condition: not inspected (used), Universal milling machine Deckel FP2Lb directly from the seller Technical data: Lhjdpezlqaijfx Aftoi >> Machine No. 0793 >> Fixed angular table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 8 to 400 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: approx. 2.2 kW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be extended by an additional 200 mm) >> Equipment: Vertical and horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> Central lubrication >> Modified control cabinet About the machine: Offered is a used universal milling machine Deckel FP2Lb in functional condition. The machine comes directly from the seller and is sold as is. The vertical head can be moved by 200 mm to allow for an even larger working area. A central pump ensures the lubrication of the various axes. A special feature of this machine type is its basic design; it is a machine with a sloped bed. The movement operations are assigned to the working spindle and thus to the tool. Different workpiece weights have no influence on the axis movements. Take advantage of the opportunity to inspect and test the machine on site while it is powered up. The Deckel is sold as a source of spare parts, without inspection and without warranty.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, Dear Sir or Madam, We are offering a Deckel FP2 Aktiv for sale. This newer model stands out primarily due to its stepless speed control with Heidenhain Aktiv control, which makes operation very easy and extremely comfortable. The machine has been thoroughly inspected in our workshop and is in very good condition. You are welcome to inspect it on-site. Delivery time: Available immediately Machine no. 2202-xxxx Table: fixed angular table or swivel-tilt table Travel: X400mm/Y220mm/Z400mm Drive power: 3KW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Ljdpfxezldnao Aftehi Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis digital display Heidenhain, stepless feed control in all 3 axes, Heidenhain digital display with Aktiv control, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We will gladly take care of shipping and/or installation

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m Lhedpjvc Amtjfx Aftei transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, total height: 2,000 mm, total length: 2,100 mm, total width: 1,500 mm, table width: 390 mm, table length: 620 mm, rotational speed (max.): 4,000 rpm, overall weight: 1,500 kg, spindle speed (min.): 4,000 rpm, number of spindles: 1, Lid FP2A Travel ranges X-axis: 300 mm Y-axis: 300 mm Z-axis: 400 mm Control system: Contour 3 Spindle mount: SK40 Quill travel: 60 mm Speed: max. 4000 RPM Table size: 620 mm x 390 mm Machine weight: 1500 kg Machine dimensions: 1.5 x 2.1 x 2.0 Control cabinet dimensions: 1.8 x 0.8 x 1.1 Includes handwheel, machine vice, and mounting fixtures. Lodpjzka Sljfx Aftehi Sold without warranty and guarantee, only to commercial businesses. You will receive an invoice with the currently applicable VAT.

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Ljdpfx Afezac Sbjtehi

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: Lhodpeu Et Nbofx Aftei - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: used, No. R 2300-0058, Kretschmer company modernization, 2016, travel ranges XYZ = 800 x 300 x 400 mm, spindle speeds 40 - 2,000 rpm, XYZ control system FAGOR. Lodpfx Afjzh Dd Hotshi

Condition: used, The machine can be inspected at our premises. Lhodpsviq Tzjfx Aftsi

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm Lhedpfx Ajv Syyveftei max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, x-travel 500 mm y-travel 200 mm Lsdpex Hay Defx Aftohi z-travel 400 mm table surface area 700 x 300 mm tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain