Tool Room Milling Machine - Universal

DECKEL FP 2

Condition: good (used), In good technical condition and fully functional. Spindle speeds: 18. Speed range: 40–2000 rpm. Total power consumption: 2.2 kW. Machine weight approx. 1200 kg. Accessories. Ndedpfjxx R Tvjx Afped

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Can be tested under power. Njdpjwxw S Ijfx Afpedd

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Nodpfx Afoxyhmvjpsdd

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW Nedpfsu I Rm Nsx Afpodd >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm Nodpfx Aoxapm Rjfpjdd -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L Nedpfsm Uygvox Afpedd - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm No. of spindle turning rate 18 speeds 40 - 2000 U/min table surface area 730 x 240 mm tool adaptor SK 40 flute distance 4 / 12 mm number of feeds 18 feed range 8 - 400 mm/min Njdpfx Afoxqrdtspjdd rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1700 x 1400 x 1700 mm - Robust/powerful universal milling machine - NEWALL digital display - Coolant device

Condition: excellent (used), Digital display Travel range X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Hydraulic vice Completely overhauled in 2019 Ndsdpfx Ajwn Td Ejfpjd

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm Ndodpfxou Nc Tws Afpod clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function Ndodpfx Aevfdatsfpod - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Coolant system Machine light Machine feet Nodpfjwgafyox Afpjdd Documentation Condition: Good, mechanics and control system workshop-tested

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Ndedpfxjumclae Afped

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition Technical data: Ndodpfouc Ubwex Afped >> Year of construction 1979 Machine no. 2202-10777 >> Rigid angle table (newly planed) >> Speed: 25 - 2500 rpm >> Feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:2,2 KW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant device >> Central lubrication To the machine : We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Njder En Dyspfx Afpsdd geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Universal tool milling machine Brand: harich (DECKEL) Model: B (FP 2) Refurbished with CE certification Geometric inspection with test protocol With warranty Accessories: Ndedpodvdczefx Afpod - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start and stop buttons - New documentation for machine and control cabinet - CE Declaration of Conformity